lkml.org 
[lkml]   [2019]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 3.16 71/99] igb: Fix an issue that PME is not enabled during runtime suspend
3.16.65-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

commit 1fb3a7a75e2efcc83ef21f2434069cddd6fae6f5 upstream.

I210 ethernet card doesn't wakeup when a cable gets plugged. It's
because its PME is not set.

Since commit 42eca2302146 ("PCI: Don't touch card regs after runtime
suspend D3"), if the PCI state is saved, pci_pm_runtime_suspend() stops
calling pci_finish_runtime_suspend(), which enables the PCI PME.

To fix the issue, let's not to save PCI states when it's runtime
suspend, to let the PCI subsystem enables PME.

Fixes: 42eca2302146 ("PCI: Don't touch card regs after runtime suspend D3")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/net/ethernet/intel/igb/igb_main.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -7419,9 +7419,11 @@ static int __igb_shutdown(struct pci_dev
igb_clear_interrupt_scheme(adapter);

#ifdef CONFIG_PM
- retval = pci_save_state(pdev);
- if (retval)
- return retval;
+ if (!runtime) {
+ retval = pci_save_state(pdev);
+ if (retval)
+ return retval;
+ }
#endif

status = rd32(E1000_STATUS);
\
 
 \ /
  Last update: 2019-04-02 15:41    [W:0.673 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site