lkml.org 
[lkml]   [2019]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH net-next v4 0/2] net: phy: marvell10g: implement suspend/resume callbacks
    Date
    Hello,

    This series implements the suspend/resume callbacks in the marvell10g
    PHY driver.

    Thanks,
    Antoine

    Since v3:
    - Use the new phy_set/clear_bits_mmd() instead of phy_modify_mmd().
    - Use VEND2.f001.11 to power down the port instead of the per-mode
    LPOWER.

    Since v2:
    - Removed the third patch, setting the PHY in low power by default, as
    the change was controversial.
    - Rebased on the latest net-next.

    Since v1:
    - Fixed a mix up in the patches where two implementations of the
    suspend/resume callbacks were kept in the driver.
    - Rebased on the latest net-next.

    Antoine Tenart (2):
    net: phy: marvell10g: implement suspend/resume callbacks
    net: phy: marvell10g: add the suspend/resume callbacks for the 88x2210

    drivers/net/phy/marvell10g.c | 14 +++++++++++++-
    1 file changed, 13 insertions(+), 1 deletion(-)

    --
    2.20.1

    \
     
     \ /
      Last update: 2019-04-02 15:16    [W:6.911 / U:0.040 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site