lkml.org 
[lkml]   [2019]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 0/6] arm64: Add initial support for Odroid-N2
Date
Neil Armstrong <narmstrong@baylibre.com> writes:

> This patchset adds basic support for :
> - Amlogic G12B, which is very similar to G12A
> - The HardKernel Odroid-N2 based on the S922X SoC
>
> The Amlogic G12B SoC is very similar with the G12A SoC, sharing
> most of the features and architecture, but with these differences :
> - The first CPU cluster only has 2xCortex-A53 instead of 4
> - G12B has a second cluster of 4xCortex-A73
> - Both cluster can achieve 2GHz instead of 1,8GHz for G12A
> - CPU Clock architecture is difference, thus needing a different
> compatible to handle this slight difference
> - Supports a MIPI CSI input
> - Embeds a Mali-G52 instead of a Mali-G31, but integration is the same
>
> Actual support is done in the same way as for the GXM support, including
> the G12A dtsi and redefining the CPU clusters.
> Unlike GXM, the first cluster is different, thus needing to remove
> the last 2 cpu nodes of the first cluster.
>
> G12B clock driver is very close, the main differences are :
> - the clock tree is duplicated for the both clusters, and the
> SYS_PLL are swapped between the clusters
> - G12A has additional clocks like for CSI an other components
>
> Dependencies :
> - Patch 1, 3, 4, 5 : None
> - Patch 2 : Depends on the v5.2 meson-clk PULL request
> - Patch 6 depends on the G12A Display DT patchset at [2]

These deps are merged/queued.

I'm assuming you'll take patches 1-3 via clk-meson. After you have a
stable tag there, i can take the 4-6 via my tree.

Kevin

\
 
 \ /
  Last update: 2019-04-16 20:38    [W:0.077 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site