lkml.org 
[lkml]   [2019]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/3] arm64: dts: meson-g12a: Add IR nodes
Hi Neil,

On Fri, Apr 12, 2019 at 12:05 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Amlogic G12A SoCs uses the exact same IR decoder as previous
> families, add the IR node and the pintctrl setting.
as far as I can tell there are either two IR decoders or one updated
IR decoder in G12A and G12B.
I'm using mesong12a.dtsi from
buildroot_openlinux_kernel_4.9_fbdev_20180706 as reference:
remote:rc@0xff808040 {
compatible = "amlogic, aml_remote";
reg = <0x0 0xff808040 0x00 0x44>, /*Multi-format IR controller*/
<0x0 0xff808000 0x00 0x20>; /*Legacy IR controller*/
...

the registers which you are mapping are for the "Legacy IR
controller", so our existing meson-ir driver will probably work (I
haven't tested it myself yet).

can you please be explicit about this in the patch description?

> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
apart from the description you can add my:
Reviewed-by: Martin Blumenstingl<martin.blumenstingl@googlemail.com>

\
 
 \ /
  Last update: 2019-04-13 14:03    [W:0.112 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site