lkml.org 
[lkml]   [2019]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 5/6] riscv: dts: add initial board data for the SiFive HiFive Unleashed
On Thu, Apr 11, 2019 at 3:43 AM Paul Walmsley <paul.walmsley@sifive.com> wrote:
>
> Add initial board data for the SiFive HiFive Unleashed A00.
>
> Currently the data populated in this DT file describes the board
> DRAM configuration and the external clock sources that supply the
> PRCI.
>
> This second version adds onboard SPI device data, fixes the board's
> memory size, and adds changes based on comments from Rob Herring
> <robh+dt@kernel.org>.
>
> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
> Signed-off-by: Paul Walmsley <paul@pwsan.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Palmer Dabbelt <palmer@sifive.com>
> Cc: Albert Ou <aou@eecs.berkeley.edu>
> Cc: devicetree@vger.kernel.org
> Cc: linux-riscv@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> ---
> arch/riscv/boot/dts/sifive/Makefile | 2 +
> .../dts/sifive/hifive-unleashed-a00-fu540.dts | 69 +++++++++++++++++++
> 2 files changed, 71 insertions(+)
> create mode 100644 arch/riscv/boot/dts/sifive/Makefile
> create mode 100644 arch/riscv/boot/dts/sifive/hifive-unleashed-a00-fu540.dts
>
> diff --git a/arch/riscv/boot/dts/sifive/Makefile b/arch/riscv/boot/dts/sifive/Makefile
> new file mode 100644
> index 000000000000..fb825db888df
> --- /dev/null
> +++ b/arch/riscv/boot/dts/sifive/Makefile
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0
> +dtb-$(CONFIG_ARCH_SIFIVE) += hifive-unleashed-a00-fu540.dtb
> diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00-fu540.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00-fu540.dts
> new file mode 100644
> index 000000000000..9d35e811a3aa
> --- /dev/null
> +++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00-fu540.dts
> @@ -0,0 +1,69 @@
> +// SPDX-License-Identifier: (Apache-2.0 OR GPL-2.0+)
> +/* Copyright (c) 2018-2019 SiFive, Inc */
> +
> +/dts-v1/;
> +
> +#include "fu540-c000.dtsi"
> +
> +/* Clock frequency (in Hz) of the PCB crystal for rtcclk */
> +#define RTCCLK_FREQ 1000000
> +
> +/ {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + model = "SiFive HiFive Unleashed A00 (FU540-C000)";
> + compatible = "sifive,hifive-unleashed-a00-fu540",
> + "sifive,hifive-unleashed-fu540",
> + "sifive,fu540-c000", "sifive-fu540";

This doesn't match your schema which has 3 entries. Really, 4 entries
is kind of pointless typically. Usually, just a board and SoC
compatible are enough.

> +
> + chosen {
> + };
> +
> + cpus {
> + timebase-frequency = <RTCCLK_FREQ>;
> + };
> +
> + memory@80000000 {
> + device_type = "memory";
> + reg = <0x0 0x80000000 0x2 0x00000000>;
> + };
> +
> + soc {
> + };
> +
> + hfclk: hfclk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <33333333>;
> + clock-output-names = "hfclk";
> + };
> +
> + rtcclk: rtcclk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <RTCCLK_FREQ>;
> + clock-output-names = "rtcclk";
> + };
> +};
> +
> +&qspi0 {
> + flash@0 {
> + compatible = "issi,is25wp256d", "jedec,spi-nor";
> + reg = <0>;
> + spi-max-frequency = <50000000>;
> + m25p,fast-read;
> + spi-tx-bus-width = <4>;
> + spi-rx-bus-width = <4>;
> + };
> +};
> +
> +&qspi2 {
> + status = "okay";
> + mmc@0 {
> + compatible = "mmc-spi-slot";
> + reg = <0>;
> + spi-max-frequency = <20000000>;
> + voltage-ranges = <3300 3300>;
> + disable-wp;
> + };
> +};
> --
> 2.20.1
>

\
 
 \ /
  Last update: 2019-04-11 15:03    [W:0.158 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site