lkml.org 
[lkml]   [2019]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] pwm: meson: don't disable pwm when setting duty repeatedly
Date
From: Bichao Zheng <bichao.zheng@amlogic.com>

There is an abnormally low about 20ms,when setting duty repeatedly.
Because setting the duty will disable pwm and then enable. Delete
this operation now.

Fixes: 211ed630753d2f ("pwm: Add support for Meson PWM Controller")
Signed-off-by: Bichao Zheng <bichao.zheng@amlogic.com>
[ Dropped code instead of hiding it behind a comment ]
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
drivers/pwm/pwm-meson.c | 5 -----
1 file changed, 5 deletions(-)

diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index 4b708c1fcb1d..e247ab632530 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -325,11 +325,6 @@ static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
if (state->period != channel->state.period ||
state->duty_cycle != channel->state.duty_cycle ||
state->polarity != channel->state.polarity) {
- if (channel->state.enabled) {
- meson_pwm_disable(meson, pwm->hwpwm);
- channel->state.enabled = false;
- }
-
if (state->polarity != channel->state.polarity) {
if (state->polarity == PWM_POLARITY_NORMAL)
meson->inverter_mask |= BIT(pwm->hwpwm);
--
2.21.0
\
 
 \ /
  Last update: 2019-04-01 20:18    [W:0.081 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site