Messages in this thread | | | Date | Fri, 8 Mar 2019 22:18:52 +0100 | From | Uwe Kleine-König <> | Subject | Re: [PATCH] pwm: img: Turn final 'else if' into 'else' in img_pwm_config |
| |
On Fri, Mar 08, 2019 at 10:38:11AM -0800, Nick Desaulniers wrote: > On Fri, Mar 8, 2019 at 12:53 AM Uwe Kleine-König > <u.kleine-koenig@pengutronix.de> wrote: > > > > On Thu, Mar 07, 2019 at 03:36:28PM -0700, Nathan Chancellor wrote: > > > When building with -Wsometimes-uninitialized, Clang warns: > > > > > > drivers/pwm/pwm-img.c:126:13: error: variable 'timebase' is used > > > uninitialized whenever 'if' condition is false > > > [-Werror,-Wsometimes-uninitialized] > > > > > > The final else if functions as an else; make that explicit so that Clang > > > understands that timebase cannot be used uninitialized. > > > > > > Link: https://github.com/ClangBuiltLinux/linux/issues/400 > > > Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> > > > --- > > > drivers/pwm/pwm-img.c | 2 +- > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > diff --git a/drivers/pwm/pwm-img.c b/drivers/pwm/pwm-img.c > > > index 815f5333bb8f..1cc5fbe1e1d3 100644 > > > --- a/drivers/pwm/pwm-img.c > > > +++ b/drivers/pwm/pwm-img.c > > > @@ -123,7 +123,7 @@ static int img_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, > > > } else if (mul <= max_timebase * 512) { > > > div = PWM_CTRL_CFG_SUB_DIV0_DIV1; > > > timebase = DIV_ROUND_UP(mul, 512); > > > - } else if (mul > max_timebase * 512) { > > > + } else { > > > dev_err(chip->dev, > > > "failed to configure timebase steps/divider value\n"); > > > return -EINVAL; > > > > This can even be simplified further. > > > > From the probe function we have: > > > > pwm_chip->max_period_ns = NSEC_PER_SEC * 512 * max_timebase / input_clk_hz > > I had trouble verifying `input_clk_hz` in the above. The divisor is > `clk_get_rate(pwm->pwm_clk)`, but is it guaranteed to always be > `input_clk_hz`? If so, where?
In the probe function it's called "clk_rate". We have:
clk_rate = clk_get_rate(pwm->pwm_clk); ... val = (u64)NSEC_PER_SEC * 512 * pwm->data->max_timebase; do_div(val, clk_rate); pwm->max_period_ns = val;
and in img_pwm_config we have:
input_clk_hz = clk_get_rate(pwm_chip->pwm_clk);
I used the name used in img_pwm_config with the intention that my reasoning is easier to understand, but obviously I failed.
This by the way highlights another patch opportunity: Unify the names that the same thing gets the same name in the different functions. This doesn't only affect "clk_rate" vs "input_clk_hz", but also "pwm_chip" vs. "pwm".
Best regards Uwe
-- Pengutronix e.K. | Uwe Kleine-König | Industrial Linux Solutions | http://www.pengutronix.de/ |
| |