lkml.org 
[lkml]   [2019]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARCv2: spinlock: remove the extra smp_mb before lock, after unlock
On Thu, Mar 07, 2019 at 05:35:46PM -0800, Vineet Gupta wrote:
> - ARCv2 LLSC based spinlocks smp_mb() both before and after the LLSC
> instructions, which is not required per lkmm ACQ/REL semantics.
> smp_mb() is only needed _after_ lock and _before_ unlock.
> So remove the extra barriers.
> The reason they were there was mainly historical. At the time of
> initial SMP Linux bringup on HS38 cores, I was too conservative,
> given the fluidity of both hw and sw. The last attempt to ditch the
> extra barrier showed some hackbench regression which is apparently
> not the case now (atleast for LLSC case, read on...)
>
> - EX based spinlocks (!CONFIG_ARC_HAS_LLSC) still needs the extra
> smp_mb(), not due to lkmm, but due to some hardware shenanigans.
> W/o that, hackbench triggers RCU stall splat. This is not a "real"
> Linux use case anyways so I'm not worried about it.
>
> | [ARCLinux]# for i in (seq 1 1 5) ; do hackbench; done
> | Running with 10 groups 400 process
> | INFO: task hackbench:158 blocked for more than 10 seconds.
> | Not tainted 4.20.0-00005-g96b18288a88e-dirty #117
> | "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> | hackbench D 0 158 135 0x00000000
> |
> | Stack Trace:
> | watchdog: BUG: soft lockup - CPU#3 stuck for 59s! [hackbench:469]
> | Modules linked in:
> | Path: (null)
> | CPU: 3 PID: 469 Comm: hackbench Not tainted 4.20.0-00005-g96b18288a88e-dirty
> |
> | [ECR ]: 0x00000000 => Check Programmer's Manual
> | [EFA ]: 0x00000000
> | [BLINK ]: do_exit+0x4a6/0x7d0
> | [ERET ]: _raw_write_unlock_irq+0x44/0x5c
>
> - And while at it, remove the extar smp_mb() from EX based
> arch_read_trylock() since the spin lock there guarantees a full
> barrier anyways
>
> - For LLSC case, hackbench threads improves with this patch (HAPS @ 50MHz)
>
> ---- before ----
> |
> | [ARCLinux]# for i in 1 2 3 4 5; do hackbench 10 thread; done
> | Running with 10 groups 400 threads
> | Time: 16.253
> | Time: 16.445
> | Time: 16.590
> | Time: 16.721
> | Time: 16.544
>
> ---- after ----
> |
> | [ARCLinux]# for i in 1 2 3 4 5; do hackbench 10 thread; done
> | Running with 10 groups 400 threads
> | Time: 15.638
> | Time: 15.730
> | Time: 15.870
> | Time: 15.842
> | Time: 15.729
>
> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>

\
 
 \ /
  Last update: 2019-03-08 09:39    [W:0.054 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site