lkml.org 
[lkml]   [2019]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v8 1/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
From
Date
Hello!

On 03/08/2019 12:14 PM, Geert Uytterhoeven wrote:

>>> Add a driver for Renesas R-Car Gen3 RPC-IF SPI controller.
>>>
>>> Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
>>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>> [...]
>>> diff --git a/drivers/spi/spi-renesas-rpc.c b/drivers/spi/spi-renesas-rpc.c
>>> new file mode 100644
>>> index 0000000..ea12017
>>> --- /dev/null
>>> +++ b/drivers/spi/spi-renesas-rpc.c
>>> @@ -0,0 +1,804 @@
>> [...]
>>> +static void rpc_spi_hw_init(struct rpc_spi *rpc)
>>> +{
>>> + //
>>> + // NOTE: The 0x260 are undocumented bits, but they must be set.
>>> + // RPC_PHYCNT_STRTIM is strobe timing adjustment bit,
>>> + // 0x0 : the delay is biggest,
>>> + // 0x1 : the delay is 2nd biggest,
>>> + // On H3 ES1.x, the value should be 0, while on others,
>>> + // the value should be 6.
>>> + //
>>> + regmap_write(rpc->regmap, RPC_PHYCNT, RPC_PHYCNT_CAL |
>>> + RPC_PHYCNT_STRTIM(6) | 0x260);
>>> +
>>> + //
>>> + // NOTE: The 0x1511144 are undocumented bits, but they must be set
>>> + // for RPC_PHYOFFSET1.
>>> + // The 0x31 are undocumented bits, but they must be set
>>> + // for RPC_PHYOFFSET2.
>>> + //
>>> + regmap_write(rpc->regmap, RPC_PHYOFFSET1, RPC_PHYOFFSET1_DDRTMG(3) |
>>> + 0x1511144);
>>> + regmap_write(rpc->regmap, RPC_PHYOFFSET2, 0x31 |
>>> + RPC_PHYOFFSET2_OCTTMG(4));
>>> + regmap_write(rpc->regmap, RPC_SSLDR, RPC_SSLDR_SPNDL(7) |
>>> + RPC_SSLDR_SLNDL(7) | RPC_SSLDR_SCKDL(7));
>>> + regmap_write(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD | RPC_CMNCR_SFDE |
>>> + RPC_CMNCR_MOIIO_HIZ | RPC_CMNCR_IOFV_HIZ |
>>> + RPC_CMNCR_BSZ(0));
>>> +}
>>
>> We clearly need runtime PM get/put() calls around this code. Otherwise,
>> we're dependant on U-Boot leaving the clocks enabled...
>
> Even that would be futile, as the common clock framework disables all
> unused clocks at late boot time.

This code is executed during the probing time and it indeed works. The clocks seem
to be disabled somewhat later...

> Gr{oetje,eeting}s,
>
> Geert

MBR, Sergei

\
 
 \ /
  Last update: 2019-03-08 18:33    [W:1.473 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site