Messages in this thread Patch in this message | | | From | Ludovic Barre <> | Subject | [PATCH 2/2] ARM: dts: stm32: add jedec compatible for nor flash on stm32mp157c-ev1 | Date | Fri, 8 Mar 2019 16:10:23 +0100 |
| |
From: Ludovic Barre <ludovic.barre@st.com>
This patch adds jedec compatible for spi-nor flash on stm32mp157c-ev1 (needed with new spi-mem interface).
Signed-off-by: Ludovic Barre <ludovic.barre@st.com> --- arch/arm/boot/dts/stm32mp157c-ev1.dts | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 7fef155..cae88d9 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -140,6 +140,7 @@ status = "okay"; flash0: mx66l51235l@0 { + compatible = "jedec,spi-nor"; reg = <0>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; @@ -148,6 +149,7 @@ }; flash1: mx66l51235l@1 { + compatible = "jedec,spi-nor"; reg = <1>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; -- 2.7.4
| |