lkml.org 
[lkml]   [2019]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v7 1/4] can: m_can: Create a m_can platform framework
From
Date
Hello Dan,

Am 08.03.19 um 13:44 schrieb Dan Murphy:
> Wolfgang
>
> On 3/8/19 4:10 AM, Wolfgang Grandegger wrote:
>> Hallo Dan,
>>
>> Am 05.03.19 um 16:52 schrieb Dan Murphy:
>>> Create a m_can platform framework that peripherial
>>> devices can register to and use common code and register sets.
>>> The peripherial devices may provide read/write and configuration
>>> support of the IP.
>>>
>>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>>> ---
>>>
>>>
>>> v7 - Fixed remaining new checkpatch issues, removed CSR setting, fixed tx hard
>>> start function to return tx_busy, and renamed device callbacks - https://lore.kernel.org/patchwork/patch/1047220/
>>>
>>> v6 - Squashed platform patch to this patch for bissectablity, fixed coding style
>>> issues, updated Kconfig help, placed mcan reg offsets back into c file, renamed
>>> priv->skb to priv->tx_skb and cleared perp interrupts at ISR start -
>>> Patch 1 comments - https://lore.kernel.org/patchwork/patch/1042446/
>>> Patch 2 comments - https://lore.kernel.org/patchwork/patch/1042442/
>>>
>>> drivers/net/can/m_can/Kconfig | 13 +-
>>> drivers/net/can/m_can/Makefile | 1 +
>>> drivers/net/can/m_can/m_can.c | 700 +++++++++++++------------
>>> drivers/net/can/m_can/m_can.h | 110 ++++
>>> drivers/net/can/m_can/m_can_platform.c | 202 +++++++
>>> 5 files changed, 682 insertions(+), 344 deletions(-)
>>> create mode 100644 drivers/net/can/m_can/m_can.h
>>> create mode 100644 drivers/net/can/m_can/m_can_platform.c
>>>
>>> diff --git a/drivers/net/can/m_can/Kconfig b/drivers/net/can/m_can/Kconfig
>>> index 04f20dd39007..f7119fd72df4 100644
>>> --- a/drivers/net/can/m_can/Kconfig
>>> +++ b/drivers/net/can/m_can/Kconfig
>>> @@ -1,5 +1,14 @@
>>> config CAN_M_CAN
>>> + tristate "Bosch M_CAN support"
>>> + ---help---
>>> + Say Y here if you want support for Bosch M_CAN controller framework.
>>> + This is common support for devices that embed the Bosch M_CAN IP.
>>> +
>>> +config CAN_M_CAN_PLATFORM
>>> + tristate "Bosch M_CAN support for io-mapped devices"
>>> depends on HAS_IOMEM
>>> - tristate "Bosch M_CAN devices"
>>> + depends on CAN_M_CAN
>>> ---help---
>>> - Say Y here if you want to support for Bosch M_CAN controller.
>>> + Say Y here if you want support for IO Mapped Bosch M_CAN controller.
>>> + This support is for devices that have the Bosch M_CAN controller
>>> + IP embedded into the device and the IP is IO Mapped to the processor.
>>> diff --git a/drivers/net/can/m_can/Makefile b/drivers/net/can/m_can/Makefile
>>> index 8bbd7f24f5be..057bbcdb3c74 100644
>>> --- a/drivers/net/can/m_can/Makefile
>>> +++ b/drivers/net/can/m_can/Makefile
>>> @@ -3,3 +3,4 @@
>>> #
>>>
>>> obj-$(CONFIG_CAN_M_CAN) += m_can.o
>>> +obj-$(CONFIG_CAN_M_CAN_PLATFORM) += m_can_platform.o
>>> diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
>>> index 9b449400376b..a60278d94126 100644
>>> --- a/drivers/net/can/m_can/m_can.c
>>> +++ b/drivers/net/can/m_can/m_can.c
>>
>> ... snip...
>>
>>> +static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,
>>> + struct net_device *dev)
>>> +{
>>> + struct m_can_priv *priv = netdev_priv(dev);
>>> +
>>> + if (can_dropped_invalid_skb(dev, skb))
>>> + return NETDEV_TX_OK;
>>> +
>>> + if (priv->is_peripherial) {
>>> + if (priv->tx_skb) {
>>> + netdev_err(dev, "hard_xmit called while tx busy\n");
>>> + return NETDEV_TX_BUSY;
>>> + }
>>
>> The problem with that approach is, that the upper layer will try to
>> resubmit the current "skb" but not the previous "tx_skb". And the
>> previous "tx_skb" has not been freed yet. I would just drop and free the
>> skb and return NETDEV_TX_OK in m_can_tx_handler() for peripheral devices
>> (like can_dropped_invalid_skb() does).
>>
>
> OK.
>
> So would this also be a bug in the hi3110 and mcp251x drivers (line 521) as well because besides checking tx_length
> this is how these drivers are written.

This is different. When entering the "start_xmit" routine, the previous
TX is still in progress. It will (hopefully) complete soon. Therefore
returning NETDEV_TX_BUSY is OK. The "start_xmit" routine will be
recalled soon with the same "skb". That scenario should/could also not
happen.

In contrast, in "m_can_tx_handler()", the skb could not be handled
because the FIFO is full. The "start_xmit" routine for peripheral
devices for that skb already returned NETDEV_TX_OK. Therefore the only
meaningful action is to drop the skb. Also this error should not happen
and if, something is going really wrong. Therefore I think, a
WARN_ONCE() would be even more appropriate. But that should be a
separate patch.

>
> In addition in the peripheral context the work queue does not report up to the upper layer the status.
> Again the hi3110 and mcp251x drivers are written this way.
>
> The only issue I see here is that the dropped and invalid check needs to come after the tx_skb check.

See above.

Wolfgang.

\
 
 \ /
  Last update: 2019-03-08 14:31    [W:0.059 / U:2.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site