lkml.org 
[lkml]   [2019]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 2/2] net: bonding: fix incorrect type in assignment
Date
Bo YU <tsu.yubo@gmail.com> wrote:

>There are some warning when:
>
>sudo make C=1 CF=-D__CHECK_ENDIAN__ drivers/net/bonding/
>
>drivers/net/bonding/bond_main.c:2438:40: warning: incorrect type in assignment (different base types)
>drivers/net/bonding/bond_main.c:2438:40: expected restricted __be16 [usertype] vlan_proto
>drivers/net/bonding/bond_main.c:2438:40:
>...
>rivers/net/bonding/bond_options.c:1089:24: warning: incorrect type in assignment (different base types)
>drivers/net/bonding/bond_options.c:1089:24: expected restricted __be32 [addressable] [usertype] target
>drivers/net/bonding/bond_options.c:1089:24: got unsigned long long const [usertype] value
>
>So fix it
>
>Signed-off-by: Bo YU <tsu.yubo@gmail.com>
>---
> drivers/net/bonding/bond_main.c | 2 +-
> drivers/net/bonding/bond_options.c | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
>diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
>index 135fec28daa9..07e52d863e91 100644
>--- a/drivers/net/bonding/bond_main.c
>+++ b/drivers/net/bonding/bond_main.c
>@@ -2435,7 +2435,7 @@ struct bond_vlan_tag *bond_verify_device_path(struct net_device *start_dev,
> tags = kcalloc(level + 1, sizeof(*tags), GFP_ATOMIC);
> if (!tags)
> return ERR_PTR(-ENOMEM);
>- tags[level].vlan_proto = VLAN_N_VID;
>+ tags[level].vlan_proto = cpu_to_be16(VLAN_N_VID);
> return tags;
> }
>
>diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c
>index da1fc17295d9..3a196999bd1b 100644
>--- a/drivers/net/bonding/bond_options.c
>+++ b/drivers/net/bonding/bond_options.c
>@@ -1086,7 +1086,7 @@ static int bond_option_arp_ip_targets_set(struct bonding *bond,
> else
> netdev_err(bond->dev, "no command found in arp_ip_targets file - use +<addr> or -<addr>\n");
> } else {
>- target = newval->value;
>+ target = cpu_to_be32(newval->value);
> ret = bond_option_arp_ip_target_add(bond, target);

I'm not sure this is correct; if I'm reading the call path
correctly, bond_changelink will

if (data[IFLA_BOND_ARP_IP_TARGET]) {
[...]
__be32 target;
[...]
target = nla_get_be32(attr);

bond_opt_initval(&newval, (__force u64)target);
err = __bond_opt_set(bond, BOND_OPT_ARP_TARGETS,
&newval);

thus, newval.value is initially be32, but stored in a u64.
__bond_opt_set will call bond_opt_parse, which in turn will call
bond_option_arp_ip_targets_set (via .set), and the change above would
swap the newval.value back to host order (on little endian architectures
for which cpu_to_be32 is not a no-op).

Am I misunderstanding? Did you test this change on an x86 or
other little endian system?

-J

---
-Jay Vosburgh, jay.vosburgh@canonical.com

\
 
 \ /
  Last update: 2019-03-08 07:53    [W:1.327 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site