lkml.org 
[lkml]   [2019]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] pinctrl: add drive for I2C related pins on MT8183
This is a v3, I think, please make sure the update the email title,
and add a changelog below ---.

On Sun, Mar 3, 2019 at 9:54 AM Zhiyong Tao <zhiyong.tao@mediatek.com> wrote:
>
> This patch provides the advanced drive for I2C used pins on MT8183.
> The detail strength specification description of the I2C pin is as follows.
> When E1=0/E0=0, the strength is 0.125mA.
> When E1=0/E0=1, the strength is 0.25mA.
> When E1=1/E0=0, the strength is 0.5mA.
> When E1=1/E0=1, the strength is 1mA.
>
> Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
> ---
> drivers/pinctrl/mediatek/pinctrl-mt8183.c | 50 ++++++++++++++++++++++++
> drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c | 45 +++++++++++++++++++++
> drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h | 13 ++++++
> drivers/pinctrl/mediatek/pinctrl-paris.c | 20 ++++++++++
> 4 files changed, 128 insertions(+)
>
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8183.c b/drivers/pinctrl/mediatek/pinctrl-mt8183.c
> index 6262fd3678ea..f034574fc593 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mt8183.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-mt8183.c
> @@ -472,6 +472,51 @@ static const struct mtk_pin_field_calc mt8183_pin_r1_range[] = {
> PIN_FIELD_BASE(133, 133, 8, 0x0D0, 0x10, 13, 1),
> };
[snip]
> static const struct mtk_pin_reg_calc mt8183_reg_cals[PINCTRL_PIN_REG_MAX] = {
> [PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt8183_pin_mode_range),
> [PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt8183_pin_dir_range),
> @@ -485,6 +530,9 @@ static const struct mtk_pin_reg_calc mt8183_reg_cals[PINCTRL_PIN_REG_MAX] = {
> [PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt8183_pin_pupd_range),
> [PINCTRL_PIN_REG_R0] = MTK_RANGE(mt8183_pin_r0_range),
> [PINCTRL_PIN_REG_R1] = MTK_RANGE(mt8183_pin_r1_range),
> + [PINCTRL_PIN_REG_DRV_EN_DIS] = MTK_RANGE(mt8183_pin_e1e0en_range),

I find the name EN_DIS confusing: I think it means ENable_DISable, but
when I read the code, I see stuff like (MANY_WORDS)_DIS = enable ? 1 :
0, which make me think that the polarity is wrong.

Can we just call this PINCTRL_PIN_REG_DRV_EN?

> + [PINCTRL_PIN_REG_DRV_E0] = MTK_RANGE(mt8183_pin_e0_range),
> + [PINCTRL_PIN_REG_DRV_E1] = MTK_RANGE(mt8183_pin_e1_range),
> };
>
[snip]

\
 
 \ /
  Last update: 2019-03-08 07:01    [W:0.052 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site