lkml.org 
[lkml]   [2019]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 0/2] ata: libahci: devslp fixes
Hello,

On Thu, Mar 7, 2019 at 12:37 PM Hans de Goede <hdegoede@redhat.com> wrote:
>
> Hi,
>
> On 07-03-19 21:27, Gwendal Grignou wrote:
> > Srinivas,
> >
> > I am looking at problem on a laptop machine that suspends to S01x, but
> > link_management is set to max_performance, because the machine is
> > connected to a charger.
>
> What is setting it to max_performance when charging? I assume chrome-os is
> running something in userspace to do this (like TLP, but I guess you are not
> using TLP) ?

Yes, we have a udev script that does this.

>
> Have you run benchmarks with max_performance vs the default?
> I seriously doubt there will be a significant difference, esp.
> with a chrome-os style workload.
>
> > Given DVLSP must be set before the laptop suspends ["""One of the
> > requirement for modern x86 system to enter lowest power mode (SLP_S0)
> > is SATA IP block to be off."""], the machine never reaches S01x.
> > Does it make sense to change the target_lpm_policy at suspend
> > (ata_port_suspend()) to min_power and bring it back to the original
> > value on resume?
>
> If userspace messes with the setting, then userspace should also
> put it back before suspending...
>
> The upstream kernel's default behavior is to have the target level set
> to a fixed level independent of the charging state. Could it be this
> fixed level is actually max-performance ? If that is the default the
> kernel comes up with, that would indicate a kernel bug.

Side note: max-performance indeed can be the default forced by the
kernel for some (broken) SATA devices:

if (dev->horkage & ATA_HORKAGE_NOLPM) {
ata_dev_warn(dev, "LPM support broken, forcing max_power\n");
dev->link->ap->target_lpm_policy = ATA_LPM_MAX_POWER;
}

So definitely these systems won't be able to go into S0ix today.

But I think the main idea that we are asking is:

1) Yes, we acknowledge that the userspace has set it max-performance.

2) However, given that the kernel already knows that:
- while in suspend, there is no real value in retaining the
max-performance.
- On the contrary, we know system will fail to go into lower
power mode because of max-suspend.

3) Does it not make sense to use this knowledge and switch to
min_power when we are actually going to suspend (even if user
specified max-performance), and restore max-performance on resume?

Or may be there are issues that this causes, that we're not aware of?
Can you please provide us some pointers?

Thanks,

Rajat

>
> Regards,
>
> Hans
>
>
>
> >
> > Gwendal.
> >
> >
> > On Mon, Jul 30, 2018 at 10:33 AM Tejun Heo <tj@kernel.org> wrote:
> >>
> >> On Mon, Jul 30, 2018 at 05:26:45PM +0200, Hans de Goede wrote:
> >>> Hi,
> >>>
> >>> On 30-07-18 17:22, Tejun Heo wrote:
> >>>> On Mon, Jul 30, 2018 at 08:15:47AM -0700, Srinivas Pandruvada wrote:
> >>>>> Hi Tejan,
> >>>>>
> >>>>> On Mon, 2018-07-02 at 12:01 -0700, Srinivas Pandruvada wrote:
> >>>>>> Some minor fixes to be able to correctly set devslp register
> >>>>>> to optimize power.
> >>>>>>
> >>>>>> Srinivas Pandruvada (2):
> >>>>>> ata: libahci: Correct setting of DEVSLP register
> >>>>>> ata: libahci: Allow reconfigure of DEVSLP register
> >>>>>>
> >>>>> Are you applying this series?
> >>>>
> >>>> I was waiting for Hans's reviews. Hans, what do you think?
> >>>
> >>> Ah I missed that this was another series. With the caveat that
> >>> I do not really know that much about devslp, both patches
> >>> seem sensible to me, so both are:
> >>>
> >>> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> >>
> >> Applied 1-2 to libata/for-4.19.
> >>
> >> Thanks.
> >>
> >> --
> >> tejun
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> >> the body of a message to majordomo@vger.kernel.org
> >> More majordomo info at http://vger.kernel.org/majordomo-info.html

\
 
 \ /
  Last update: 2019-03-08 00:08    [W:0.568 / U:0.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site