lkml.org 
[lkml]   [2019]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] dt-bindings: ASoC: axi-i2s: make both "rx" and "tx" optional
Date
Both the capture and playback channels are optional in the axi_i2s IP
block. Document how to tell the driver which channels are
instantiated.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
---
Documentation/devicetree/bindings/sound/adi,axi-i2s.txt | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt b/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt
index 4248b662deff..229ad1392cdc 100644
--- a/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt
@@ -1,5 +1,8 @@
ADI AXI-I2S controller

+The core can be generated with transmit (playback), only receive
+(capture) or both directions enabled.
+
Required properties:
- compatible : Must be "adi,axi-i2s-1.00.a"
- reg : Must contain I2S core's registers location and length
@@ -9,8 +12,8 @@ Required properties:
- clock-names : "axi" for the clock to the AXI interface, "ref" for the sample
rate reference clock.
- dmas: Pairs of phandle and specifier for the DMA channels that are used by
- the core. The core expects two dma channels, one for transmit and one for
- receive.
+ the core. The core expects two dma channels if both transmit and receive are
+ enabled, one channel otherwise.
- dma-names : "tx" for the transmit channel, "rx" for the receive channel.

For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties
--
2.17.1
\
 
 \ /
  Last update: 2019-03-07 22:46    [W:0.116 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site