lkml.org 
[lkml]   [2019]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/3] mmc: mmci: Support any block sizes for ux500v2 and qcom variant
On Tue 05 Mar 14:25 PST 2019, Linus Walleij wrote:

> Sorry for top-posting, patch included for context.
>
> I saw today that Brian has the Nexus 5 working with Broadcom/Cypress
> 4339 over SDIO on the MMCI.
>
> Brian are you managing to use the WLAN without this patch or is this
> something you stacked up to make it work? (If you want context I
> can forward the rest of the conversation where we discuss how to
> fix it properly.)
>

Brian's Nexus 5 is on 8974 where the MMCI block has become the sdhci-msm
block, so while being a superset (afaict) of the old MMCI block we use
the sdhci driver instead.

> I discussed this patch several times with Ulf and I think Niklas looked
> at it too, but we never got around to fix it up properly.
>

This is still needed for at least 8064 to have working sdio wifi (and
perhaps your 8060?).

Regards,
Bjorn

> Yours,
> Linus Walleij
>
>
> On Fri, Aug 22, 2014 at 6:54 AM Srinivas Kandagatla
> <srinivas.kandagatla@linaro.org> wrote:
>
> > From: Ulf Hansson <ulf.hansson@linaro.org>
> >
> > For the ux500v2 variant of the PL18x block, any block sizes are
> > supported. This will make it possible to decrease data overhead
> > for SDIO transfers.
> >
> > This patch is based on Ulf Hansson patch
> > http://www.spinics.net/lists/linux-mmc/msg12160.html
> >
> > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> > enabled this support on qcom variant.
> >
> > Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> > ---
> > drivers/mmc/host/mmci.c | 10 +++++++---
> > 1 file changed, 7 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
> > index c11cb05..533ad2b 100644
> > --- a/drivers/mmc/host/mmci.c
> > +++ b/drivers/mmc/host/mmci.c
> > @@ -77,6 +77,7 @@ static unsigned int fmax = 515633;
> > * @qcom_fifo: enables qcom specific fifo pio read logic.
> > * @reversed_irq_handling: handle data irq before cmd irq.
> > * @qcom_dml: enables qcom specific dma glue for dma transfers.
> > + * @any_blksize: true if block any sizes are supported
> > */
> > struct variant_data {
> > unsigned int clkreg;
> > @@ -102,6 +103,7 @@ struct variant_data {
> > bool qcom_fifo;
> > bool reversed_irq_handling;
> > bool qcom_dml;
> > + bool any_blksize;
> > };
> >
> > static struct variant_data variant_arm = {
> > @@ -194,6 +196,7 @@ static struct variant_data variant_ux500v2 = {
> > .pwrreg_clkgate = true,
> > .busy_detect = true,
> > .pwrreg_nopower = true,
> > + .any_blksize = true,
> > };
> >
> > static struct variant_data variant_qcom = {
> > @@ -212,6 +215,7 @@ static struct variant_data variant_qcom = {
> > .explicit_mclk_control = true,
> > .qcom_fifo = true,
> > .qcom_dml = true,
> > + .any_blksize = true,
> > };
> >
> > static int mmci_card_busy(struct mmc_host *mmc)
> > @@ -239,10 +243,11 @@ static int mmci_card_busy(struct mmc_host *mmc)
> > static int mmci_validate_data(struct mmci_host *host,
> > struct mmc_data *data)
> > {
> > + struct variant_data *variant = host->variant;
> > +
> > if (!data)
> > return 0;
> > -
> > - if (!is_power_of_2(data->blksz)) {
> > + if (!is_power_of_2(data->blksz) && !variant->any_blksize) {
> > dev_err(mmc_dev(host->mmc),
> > "unsupported block size (%d bytes)\n", data->blksz);
> > return -EINVAL;
> > @@ -796,7 +801,6 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
> > writel(host->size, base + MMCIDATALENGTH);
> >
> > blksz_bits = ffs(data->blksz) - 1;
> > - BUG_ON(1 << blksz_bits != data->blksz);
> >
> > if (variant->blksz_datactrl16)
> > datactrl = MCI_DPSM_ENABLE | (data->blksz << 16);
> > --
> > 1.9.1
> >

\
 
 \ /
  Last update: 2019-03-06 18:05    [W:0.135 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site