lkml.org 
[lkml]   [2019]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] Document: dt: binding: imx: Fix PAD_CTL_DSE_X*
Date
[...]

> > > Btw, I saw that imx7d-sdb.dts (and probably other i.MX 7 boards too)
> > > use three different settings for usdhc pinctrl: 0x59, 0x5a and 0x5b
> > > (for default, 100MHz and 200MHz respectively). One would expect that
> > > higher frequency use higher driver strength (and this is the case for i.MX 6).
> > > But with this new/corrected pad values this means we use x4, x2 and
> > > x6 for default, 100MHz and 200MHz respectively. This hardly seems right..?
> > > Probably needs fixing too?
> > >
> >
> > Yes, that's true.
> > Especially 100Mhz setting should be updated.
> >
> > Haibo,
> > Can you please help double check if X2 for 50Mhz and X4 for 100Mhz can
> > work stably on MX7D SDB?
> > If yes, we'd like to update the pad setting according to new RM version.
> >
>
> X2 for high speed and x4 for ddr50/ddr52 can work stable on MX7D SDB.
> I think all the 7D related dts need to fix this. Not sure whether 7S need this fix,
> can you confirm?
>

Yes, please make a patch to test board maintainer.

Regards
Dong Aisheng

> Best Regards
> Haibo Chen

\
 
 \ /
  Last update: 2019-03-06 14:37    [W:0.081 / U:0.868 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site