lkml.org 
[lkml]   [2019]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 1/8] spi: lpspi: Add i.MX8 boards support for lpspi
Date
Add both ipg and per clock for lpspi to support i.MX8QM/QXP boards.

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
---
V2:
- No change. But add DT-bindings string at the next patch.
---
drivers/spi/spi-fsl-lpspi.c | 52 +++++++++++++++++++++++++++++--------
1 file changed, 41 insertions(+), 11 deletions(-)

diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index 391863914043..f363c000d24a 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -84,7 +84,8 @@ struct lpspi_config {
struct fsl_lpspi_data {
struct device *dev;
void __iomem *base;
- struct clk *clk;
+ struct clk *clk_ipg;
+ struct clk *clk_per;
bool is_slave;

void *rx_buf;
@@ -151,8 +152,19 @@ static int lpspi_prepare_xfer_hardware(struct spi_controller *controller)
{
struct fsl_lpspi_data *fsl_lpspi =
spi_controller_get_devdata(controller);
+ int ret;
+
+ ret = clk_prepare_enable(fsl_lpspi->clk_ipg);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(fsl_lpspi->clk_per);
+ if (ret) {
+ clk_disable_unprepare(fsl_lpspi->clk_ipg);
+ return ret;
+ }

- return clk_prepare_enable(fsl_lpspi->clk);
+ return 0;
}

static int lpspi_unprepare_xfer_hardware(struct spi_controller *controller)
@@ -160,7 +172,8 @@ static int lpspi_unprepare_xfer_hardware(struct spi_controller *controller)
struct fsl_lpspi_data *fsl_lpspi =
spi_controller_get_devdata(controller);

- clk_disable_unprepare(fsl_lpspi->clk);
+ clk_disable_unprepare(fsl_lpspi->clk_ipg);
+ clk_disable_unprepare(fsl_lpspi->clk_per);

return 0;
}
@@ -241,7 +254,7 @@ static int fsl_lpspi_set_bitrate(struct fsl_lpspi_data *fsl_lpspi)
unsigned int perclk_rate, scldiv;
u8 prescale;

- perclk_rate = clk_get_rate(fsl_lpspi->clk);
+ perclk_rate = clk_get_rate(fsl_lpspi->clk_per);
for (prescale = 0; prescale < 8; prescale++) {
scldiv = perclk_rate /
(clkdivs[prescale] * config.speed_hz) - 2;
@@ -526,15 +539,30 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
goto out_controller_put;
}

- fsl_lpspi->clk = devm_clk_get(&pdev->dev, "ipg");
- if (IS_ERR(fsl_lpspi->clk)) {
- ret = PTR_ERR(fsl_lpspi->clk);
+ fsl_lpspi->clk_per = devm_clk_get(&pdev->dev, "per");
+ if (IS_ERR(fsl_lpspi->clk_per)) {
+ ret = PTR_ERR(fsl_lpspi->clk_per);
+ goto out_controller_put;
+ }
+
+ fsl_lpspi->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+ if (IS_ERR(fsl_lpspi->clk_ipg)) {
+ ret = PTR_ERR(fsl_lpspi->clk_ipg);
+ goto out_controller_put;
+ }
+
+ ret = clk_prepare_enable(fsl_lpspi->clk_ipg);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "can't enable lpspi ipg clock, ret=%d\n", ret);
goto out_controller_put;
}

- ret = clk_prepare_enable(fsl_lpspi->clk);
+ ret = clk_prepare_enable(fsl_lpspi->clk_per);
if (ret) {
- dev_err(&pdev->dev, "can't enable lpspi clock, ret=%d\n", ret);
+ dev_err(&pdev->dev,
+ "can't enable lpspi per clock, ret=%d\n", ret);
+ clk_disable_unprepare(fsl_lpspi->clk_ipg);
goto out_controller_put;
}

@@ -542,7 +570,8 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
fsl_lpspi->txfifosize = 1 << (temp & 0x0f);
fsl_lpspi->rxfifosize = 1 << ((temp >> 8) & 0x0f);

- clk_disable_unprepare(fsl_lpspi->clk);
+ clk_disable_unprepare(fsl_lpspi->clk_per);
+ clk_disable_unprepare(fsl_lpspi->clk_ipg);

ret = devm_spi_register_controller(&pdev->dev, controller);
if (ret < 0) {
@@ -564,7 +593,8 @@ static int fsl_lpspi_remove(struct platform_device *pdev)
struct fsl_lpspi_data *fsl_lpspi =
spi_controller_get_devdata(controller);

- clk_disable_unprepare(fsl_lpspi->clk);
+ clk_disable_unprepare(fsl_lpspi->clk_per);
+ clk_disable_unprepare(fsl_lpspi->clk_ipg);

return 0;
}
--
2.17.1
\
 
 \ /
  Last update: 2019-03-06 07:32    [W:0.141 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site