lkml.org 
[lkml]   [2019]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 4/5] i2c: mediatek: Add i2c and apdma sync in i2c driver
On Tue, Feb 26, 2019 at 9:11 PM Qii Wang <qii.wang@mediatek.com> wrote:
>
> When i2c and apdma use different source clocks, we should enable
> synchronization between them.
>
> Signed-off-by: Qii Wang <qii.wang@mediatek.com>

Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>

> ---
> drivers/i2c/busses/i2c-mt65xx.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
> index 14d6b38..75d88e1 100644
> --- a/drivers/i2c/busses/i2c-mt65xx.c
> +++ b/drivers/i2c/busses/i2c-mt65xx.c
> @@ -77,6 +77,8 @@
> #define I2C_CONTROL_DIR_CHANGE (0x1 << 4)
> #define I2C_CONTROL_ACKERR_DET_EN (0x1 << 5)
> #define I2C_CONTROL_TRANSFER_LEN_CHANGE (0x1 << 6)
> +#define I2C_CONTROL_DMAACK_EN (0x1 << 8)
> +#define I2C_CONTROL_ASYNC_MODE (0x1 << 9)
> #define I2C_CONTROL_WRAPPER (0x1 << 0)
>
> #define I2C_DRV_NAME "i2c-mt65xx"
> @@ -169,6 +171,7 @@ struct mtk_i2c_compatible {
> unsigned char aux_len_reg: 1;
> unsigned char support_33bits: 1;
> unsigned char timing_adjust: 1;
> + unsigned char dma_sync: 1;
> };
>
> struct mtk_i2c {
> @@ -218,6 +221,7 @@ struct mtk_i2c {
> .aux_len_reg = 1,
> .support_33bits = 1,
> .timing_adjust = 1,
> + .dma_sync = 0,
> };
>
> static const struct mtk_i2c_compatible mt6577_compat = {
> @@ -229,6 +233,7 @@ struct mtk_i2c {
> .aux_len_reg = 0,
> .support_33bits = 0,
> .timing_adjust = 0,
> + .dma_sync = 0,
> };
>
> static const struct mtk_i2c_compatible mt6589_compat = {
> @@ -240,6 +245,7 @@ struct mtk_i2c {
> .aux_len_reg = 0,
> .support_33bits = 0,
> .timing_adjust = 0,
> + .dma_sync = 0,
> };
>
> static const struct mtk_i2c_compatible mt7622_compat = {
> @@ -251,6 +257,7 @@ struct mtk_i2c {
> .aux_len_reg = 1,
> .support_33bits = 0,
> .timing_adjust = 0,
> + .dma_sync = 0,
> };
>
> static const struct mtk_i2c_compatible mt8173_compat = {
> @@ -261,6 +268,7 @@ struct mtk_i2c {
> .aux_len_reg = 1,
> .support_33bits = 1,
> .timing_adjust = 0,
> + .dma_sync = 0,
> };
>
> static const struct of_device_id mtk_i2c_of_match[] = {
> @@ -360,6 +368,9 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
>
> control_reg = I2C_CONTROL_ACKERR_DET_EN |
> I2C_CONTROL_CLK_EXT_EN | I2C_CONTROL_DMA_EN;
> + if (i2c->dev_comp->dma_sync)
> + control_reg |= I2C_CONTROL_DMAACK_EN | I2C_CONTROL_ASYNC_MODE;
> +
> mtk_i2c_writew(i2c, control_reg, OFFSET_CONTROL);
> mtk_i2c_writew(i2c, I2C_DELAY_LEN, OFFSET_DELAY_LEN);
>
> --
> 1.7.9.5
>

\
 
 \ /
  Last update: 2019-03-06 11:45    [W:0.125 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site