Messages in this thread | | | Date | Mon, 4 Mar 2019 11:35:19 +0100 | From | Miquel Raynal <> | Subject | Re: [PATCH v4 8/9] mtd: rawnand: ingenic: Add support for the JZ4725B |
| |
Hi Paul,
Paul Cercueil <paul@crapouillou.net> wrote on Sat, 9 Feb 2019 16:23:04 -0300:
> The boot ROM of the JZ4725B SoC expects a specific OOB layout on the > NAND, so we use it unconditionally in the ingenic-nand driver. > > Also add the jz4725b-bch driver to support the JZ4725B-specific BCH > hardware. > > Signed-off-by: Paul Cercueil <paul@crapouillou.net> > --- > > Changes: > > v2: Instead of forcing the OOB layout, leave it to the board code or > devicetree to decide if the jz4725b-specific layout should be used > or not. > > v3: - Revert the change in v2, as the previous behaviour was correct. > - Also add support for the hardware BCH of the JZ4725B in this > patch. > > v4: - Add MODULE_* macros > - Add tweaks suggested by upstream feedback > > drivers/mtd/nand/raw/ingenic/Kconfig | 10 + > drivers/mtd/nand/raw/ingenic/Makefile | 1 + > drivers/mtd/nand/raw/ingenic/ingenic_nand.c | 48 ++++- > drivers/mtd/nand/raw/ingenic/jz4725b_bch.c | 292 ++++++++++++++++++++++++++++ > 4 files changed, 350 insertions(+), 1 deletion(-) > create mode 100644 drivers/mtd/nand/raw/ingenic/jz4725b_bch.c >
[...]
> +static int jz4725b_calculate(struct ingenic_ecc *bch, > + struct ingenic_ecc_params *params, > + const u8 *buf, u8 *ecc_code) > +{ > + int ret; > + > + mutex_lock(&bch->lock); > + ret = jz4725b_bch_init(bch, params, true);
I really don't like this bch_init name. A BCH initialization is what is supposed to be done only once (probably at boot time), can you find a better name or a better organization of the correct/calculate path?
> + if (ret) { > + dev_err(bch->dev, "Unable to init BCH with given parameters\n"); > + goto out_disable; > + } > + > + jz4725b_bch_write_data(bch, buf, params->size); > + > + ret = jz4725b_bch_wait_complete(bch, BCH_BHINT_ENCF, NULL); > + if (ret) { > + dev_err(bch->dev, "timed out while calculating ECC\n"); > + goto out_disable; > + } > + > + jz4725b_bch_read_parity(bch, ecc_code, params->bytes); > + > +out_disable: > + jz4725b_bch_disable(bch); > + mutex_unlock(&bch->lock); > + > + return ret; > +} > +
[...]
Thanks, Miquèl
| |