Messages in this thread Patch in this message | | | From | Andrey Smirnov <> | Subject | [PATCH v4 3/5] arm64: dts: imx8mq: Combine PCIE power domains | Date | Sun, 31 Mar 2019 19:24:11 -0700 |
| |
According to NXP's FAE feedback and a comment in ATF firmware, PCIE1 and PCIE2 power domains can't really be used independently. Due to shared reset line both power domains have to be turned on at the same time. Account for that quirk by combining PCIE power domains into a single 'pgc_pcie' power domain.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: "A.s. Dong" <aisheng.dong@nxp.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 656f7cb97703..d7b564501fa4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -472,9 +472,25 @@ reg = <IMX8M_POWER_DOMAIN_MIPI>; }; - pgc_pcie1: power-domain@1 { + /* + * As per comment in ATF source code: + * + * PCIE1 and PCIE2 share the + * same reset signal, if we + * power down PCIE2, PCIE1 + * will be held in reset too. + * + * So instead of creating two + * separate power domains for + * PCIE1 and PCIE2 we create a + * link between both and use + * it as a shared PCIE power + * domain. + */ + pgc_pcie: power-domain@1 { #power-domain-cells = <0>; reg = <IMX8M_POWER_DOMAIN_PCIE1>; + power-domains = <&pgc_pcie2>; }; pgc_otg1: power-domain@2 { -- 2.20.1
| |