Messages in this thread | | | From | Vladimir Oltean <> | Subject | [PATCH net-next 00/17] NXP SJA1105 DSA driver | Date | Sun, 31 Mar 2019 20:42:15 +0300 |
| |
This patchset adds a DSA driver for the SPI-managed NXP SJA1105 switch. Due to the hardware's unfriendliness, most of its state needs to be shadowed in kernel memory by the driver. To support this and keep a decent amount of cleanliness in the code, a new generic API for converting between CPU-accessible ("unpacked") structures and hardware-accessible ("packed") structures is proposed and used.
Then several small modifications are done to the DSA core, like changing the order of two calls during initialization, or permitting driver access to the dp->vlan_filtering property.
These small modifications are done for the greater goal of adding support for 802.1Q pseudo-switch tagging. The limitations of this type of tagging are discussed in the commit that adds it, and in the code comments.
The SJA1105 driver then proceeds to extend this 8021q switch tagging protocol while adding its own (tag_sja1105). This is done because SJA1105 needs SPI intervention during transmission of link-local traffic, which cannot be done from the xmit handler but requires a deferred worker thread.
The driver is GPL-2.0 licensed. The source code files which are licensed as BSD-3-Clause are hardware support files and derivative of the userspace NXP sja1105-tool program, which is BSD-3-Clause licensed.
TODO items: * Add full support for the P/Q/R/S series. The patches were mostly tested on a first-generation T device. * Add timestamping support and PTP clock manipulation. * Figure out what the current state of tc-taprio hw offload is, and attempt to configure the switch's time-aware scheduler using that. * Rework link state callbacks to use phylink once the SGMII port is supported.
Changes from RFC: * Removed the packing code for the static configuration tables that were not currently used * Removed the code for unpacking a static configuration structure from a memory buffer (not used) * Completely removed the SGMII stubs, since the configuration is not complete anyway. * Moved some code from the SJA1105 introduction commit into the patch that used it. * Made the code for checking global VLAN filtering generic and made b53 driver use it. * Made mt7530 driver use the new generic dp->vlan_filtering * Fixed check for stringset in .get_sset_count * Minor cleanup in sja1105_clocking.c * Fixed a confusing typo in DSA
RFC can be found at: https://www.mail-archive.com/netdev@vger.kernel.org/msg291717.html
Vladimir Oltean (17): lib: Add support for generic packing operations net: dsa: Fix pharse -> phase typo net: dsa: Store vlan_filtering as a property of dsa_port net: dsa: mt7530: Use vlan_filtering property from dsa_port net: dsa: Add more convenient functions for installing port VLANs net: dsa: Call driver's setup callback after setting up its switchdev notifier net: dsa: Optional VLAN-based port separation for switches without tagging net: dsa: Be aware of switches where VLAN filtering is a global setting net: dsa: b53: Let DSA handle mismatched VLAN filtering settings net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch net: dsa: sja1105: Add support for FDB and MDB management net: dsa: sja1105: Add support for VLAN operations net: dsa: sja1105: Add support for ethtool port counters net: dsa: sja1105: Add support for traffic through standalone ports net: dsa: sja1105: Add support for Spanning Tree Protocol Documentation: networking: dsa: Add details about NXP SJA1105 driver dt-bindings: net: dsa: Add documentation for NXP SJA1105 driver
.../devicetree/bindings/net/dsa/sja1105.txt | 123 ++ Documentation/networking/dsa/sja1105.txt | 83 + Documentation/packing.txt | 150 ++ MAINTAINERS | 14 + drivers/net/dsa/Kconfig | 2 + drivers/net/dsa/Makefile | 1 + drivers/net/dsa/b53/b53_common.c | 25 +- drivers/net/dsa/mt7530.c | 14 +- drivers/net/dsa/mt7530.h | 1 - drivers/net/dsa/sja1105/Kconfig | 17 + drivers/net/dsa/sja1105/Makefile | 10 + drivers/net/dsa/sja1105/sja1105.h | 150 ++ drivers/net/dsa/sja1105/sja1105_clocking.c | 643 +++++++ .../net/dsa/sja1105/sja1105_dynamic_config.c | 518 ++++++ .../net/dsa/sja1105/sja1105_dynamic_config.h | 40 + drivers/net/dsa/sja1105/sja1105_ethtool.c | 423 +++++ drivers/net/dsa/sja1105/sja1105_main.c | 1547 +++++++++++++++++ drivers/net/dsa/sja1105/sja1105_spi.c | 665 +++++++ .../net/dsa/sja1105/sja1105_static_config.c | 1074 ++++++++++++ .../net/dsa/sja1105/sja1105_static_config.h | 311 ++++ include/linux/dsa/sja1105.h | 52 + include/linux/packing.h | 49 + include/net/dsa.h | 11 + lib/Makefile | 2 +- lib/packing.c | 211 +++ net/dsa/Kconfig | 12 + net/dsa/Makefile | 2 + net/dsa/dsa.c | 6 + net/dsa/dsa2.c | 8 +- net/dsa/dsa_priv.h | 15 + net/dsa/port.c | 75 +- net/dsa/slave.c | 16 +- net/dsa/switch.c | 3 +- net/dsa/tag_8021q.c | 193 ++ net/dsa/tag_sja1105.c | 142 ++ 35 files changed, 6556 insertions(+), 52 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/dsa/sja1105.txt create mode 100644 Documentation/networking/dsa/sja1105.txt create mode 100644 Documentation/packing.txt create mode 100644 drivers/net/dsa/sja1105/Kconfig create mode 100644 drivers/net/dsa/sja1105/Makefile create mode 100644 drivers/net/dsa/sja1105/sja1105.h create mode 100644 drivers/net/dsa/sja1105/sja1105_clocking.c create mode 100644 drivers/net/dsa/sja1105/sja1105_dynamic_config.c create mode 100644 drivers/net/dsa/sja1105/sja1105_dynamic_config.h create mode 100644 drivers/net/dsa/sja1105/sja1105_ethtool.c create mode 100644 drivers/net/dsa/sja1105/sja1105_main.c create mode 100644 drivers/net/dsa/sja1105/sja1105_spi.c create mode 100644 drivers/net/dsa/sja1105/sja1105_static_config.c create mode 100644 drivers/net/dsa/sja1105/sja1105_static_config.h create mode 100644 include/linux/dsa/sja1105.h create mode 100644 include/linux/packing.h create mode 100644 lib/packing.c create mode 100644 net/dsa/tag_8021q.c create mode 100644 net/dsa/tag_sja1105.c
-- 2.17.1
| |