lkml.org 
[lkml]   [2019]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/6] dt-bindings: connector: add optional properties for Type-B
On Fri, Mar 15, 2019 at 03:38:28PM +0800, Chunfeng Yun wrote:
> Add id-gpios, vbus-gpios, vbus-supply and pinctrl properties for
> usb-b-connector
>
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> ---
> v2 changes:
> 1. describe more clear for vbus-gpios and vbus-supply suggested by Hans
> ---
> .../devicetree/bindings/connector/usb-connector.txt | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/connector/usb-connector.txt b/Documentation/devicetree/bindings/connector/usb-connector.txt
> index a9a2f2fc44f2..1c4ed6c9afa8 100644
> --- a/Documentation/devicetree/bindings/connector/usb-connector.txt
> +++ b/Documentation/devicetree/bindings/connector/usb-connector.txt
> @@ -17,6 +17,15 @@ Optional properties:
> - self-powered: Set this property if the usb device that has its own power
> source.
>
> +Optional properties for usb-b-connector:
> +- id-gpios: gpio for USB ID pin.
> +- vbus-gpios: gpio for USB VBUS pin, used to detect presence of VBUS 5V.
> + see gpio/gpio.txt.

Please make it explicit that this is an input gpio. An output GPIO
controlling a Vbus regulator should be modelled as a regulator.

> +- vbus-supply: a phandle to the regulator for USB VBUS if needed.
> +- pinctrl-names : a pinctrl state named "default" is optional
> +- pinctrl-0 : pin control group
> + see pinctrl/pinctrl-bindings.txt
> +
> Optional properties for usb-c-connector:
> - power-role: should be one of "source", "sink" or "dual"(DRP) if typec
> connector has power support.
> --
> 2.20.1
>

\
 
 \ /
  Last update: 2019-03-31 08:41    [W:0.108 / U:1.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site