lkml.org 
[lkml]   [2019]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/2] Add Updown Counter support for Milbeaut M10V SoC
On Tue, 26 Mar 2019 15:32:34 +0900
Shinji Kanematsu <kanematsu.shinji@socionext.com> wrote:

> This is a series of patch which adds Updown Counter support on
> Milbeaut M10V SoC.
>
> The Updown Counter counts input pulse signal from external quadrature encoder.
> It also has input pulse signal counter function.
Hi Shinji,

Are you aware of the counter subsystem that has been proposed (and
as far as I am concerned is ready to be merged)?

https://patchwork.kernel.org/project/linux-iio/list/?series=147
(I think that's the latest version posted)..
William, perhaps you could give an update?

(bad luck, you are getting popular ;)

I'll take a quick review as it stands, as some issues may carry over.
I appreciate that it's always unfortunate to try to upstream stuff at the
same time as a new framework is being developed / upstreamed, but I don't
intend to take any additional counter drivers into IIO. We just
end up having to maintain old interfaces in more and more drivers.

Thanks,

Jonathan

>
> Shinji Kanematsu (2):
> dt-bindings: iio: counter: Add Milbeaut Updown Counter
> iio: counter: Add support for Milbeaut Updown Counter
>
> .../bindings/iio/counter/milbeaut-updown_cnt.txt | 22 ++
> drivers/iio/counter/Kconfig | 12 +
> drivers/iio/counter/Makefile | 1 +
> drivers/iio/counter/milbeaut-updown.h | 38 ++
> drivers/iio/counter/milbeaut-updown_cnt.c | 385 +++++++++++++++++++++
> 5 files changed, 458 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/counter/milbeaut-updown_cnt.txt
> create mode 100644 drivers/iio/counter/milbeaut-updown.h
> create mode 100644 drivers/iio/counter/milbeaut-updown_cnt.c
>

\
 
 \ /
  Last update: 2019-03-30 19:36    [W:0.243 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site