lkml.org 
[lkml]   [2019]   [Mar]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/4] staging: iio: ad5933: add SPDX identifier
On Thu, 28 Feb 2019 23:52:30 -0300
Marcelo Schmitt <marcelo.schmitt1@gmail.com> wrote:

> Add SPDX identifier of GPL-2.0 for the ad5933 driver.
> Organize imports.
> Make multi-line comments compliant with the preferred code style.

One type of change per patch please.
So this is at least 3 patches.
SPDX,
Imports,
comment style.

Actual contents looks fine.

Jonathan

>
> Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
> ---
> .../staging/iio/impedance-analyzer/ad5933.c | 30 ++++++++++---------
> 1 file changed, 16 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c
> index 3134295f014f..d75bdfbf93de 100644
> --- a/drivers/staging/iio/impedance-analyzer/ad5933.c
> +++ b/drivers/staging/iio/impedance-analyzer/ad5933.c
> @@ -1,27 +1,26 @@
> +// SPDX-License-Identifier: GPL-2.0
> /*
> * AD5933 AD5934 Impedance Converter, Network Analyzer
> *
> * Copyright 2011 Analog Devices Inc.
> - *
> - * Licensed under the GPL-2.
> */
>
> -#include <linux/interrupt.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> #include <linux/device.h>
> -#include <linux/kernel.h>
> -#include <linux/sysfs.h>
> +#include <linux/err.h>
> #include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> #include <linux/regulator/consumer.h>
> +#include <linux/sysfs.h>
> #include <linux/types.h>
> -#include <linux/err.h>
> -#include <linux/delay.h>
> -#include <linux/module.h>
> -#include <linux/clk.h>
>
> -#include <linux/iio/iio.h>
> -#include <linux/iio/sysfs.h>
> #include <linux/iio/buffer.h>
> +#include <linux/iio/iio.h>
> #include <linux/iio/kfifo_buf.h>
> +#include <linux/iio/sysfs.h>
>
> /* AD5933/AD5934 Registers */
> #define AD5933_REG_CONTROL_HB 0x80 /* R/W, 1 byte */
> @@ -474,7 +473,8 @@ static IIO_DEVICE_ATTR(out_voltage0_settling_cycles, 0644,
> ad5933_store,
> AD5933_OUT_SETTLING_CYCLES);
>
> -/* note:
> +/*
> + * note:
> * ideally we would handle the scale attributes via the iio_info
> * (read|write)_raw methods, however this part is a untypical since we
> * don't create dedicated sysfs channel attributes for out0 and in0.
> @@ -572,7 +572,8 @@ static int ad5933_ring_postenable(struct iio_dev *indio_dev)
> {
> struct ad5933_state *st = iio_priv(indio_dev);
>
> - /* AD5933_CTRL_INIT_START_FREQ:
> + /*
> + * AD5933_CTRL_INIT_START_FREQ:
> * High Q complex circuits require a long time to reach steady state.
> * To facilitate the measurement of such impedances, this mode allows
> * the user full control of the settling time requirement before
> @@ -663,7 +664,8 @@ static void ad5933_work(struct work_struct *work)
> }
>
> if (status & AD5933_STAT_SWEEP_DONE) {
> - /* last sample received - power down do
> + /*
> + * last sample received - power down do
> * nothing until the ring enable is toggled
> */
> ad5933_cmd(st, AD5933_CTRL_POWER_DOWN);

\
 
 \ /
  Last update: 2019-03-03 13:02    [W:0.152 / U:1.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site