lkml.org 
[lkml]   [2019]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] spi: tegra20-slink: change chip select action order
On Tue, Mar 26, 2019 at 03:30:50PM +0100, Randolph Maaßen wrote:
> To transfer via SPI the tegra20-slink driver first sets the command
> register, which contains the chip select value, and after that the
> command2 register, which contains the chip select line. This leads to a
> small spike in the chip selct 0 line between the set of the value and
> the selection of the chip select line.
>
> This commit changes the order of the register writes so that first the
> chip select line is chosen and then the value is set, removing the
> spike.
>
> Signed-off-by: Randolph Maaßen <gaireg@gaireg.de>
> ---
> drivers/spi/spi-tegra20-slink.c | 12 +++++++++---
> 1 file changed, 9 insertions(+), 3 deletions(-)

With the typofix that Sowjanya pointed out, this patch is:

Acked-by: Thierry Reding <treding@nvidia.com>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-03-28 17:35    [W:0.081 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site