lkml.org 
[lkml]   [2019]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/3] media: dt-bindings: media: meson-ao-cec: Add G12A AO-CEC-B Compatible
From
Date
On 3/25/19 6:34 PM, Neil Armstrong wrote:
> The Amlogic G12A embeds a second CEC controller named AO-CEC-B, and
> the other one is AO-CEC-A described by the current bindings.
>
> The registers interface is very close but the internal architecture

registers -> register

> is totally different.
>
> The other difference is the closk source, the AO-CEC-B takes the

closk -> clock

> "oscin", the Always-On Oscillator clock, as input and embeds a
> dual-divider clock divider to provide the precise 32768Hz base
> clock for CEC communication.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> .../devicetree/bindings/media/meson-ao-cec.txt | 15 +++++++++++----
> 1 file changed, 11 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/meson-ao-cec.txt b/Documentation/devicetree/bindings/media/meson-ao-cec.txt
> index 8671bdb08080..d6e2f9cf0aaf 100644
> --- a/Documentation/devicetree/bindings/media/meson-ao-cec.txt
> +++ b/Documentation/devicetree/bindings/media/meson-ao-cec.txt
> @@ -4,16 +4,23 @@ The Amlogic Meson AO-CEC module is present is Amlogic SoCs and its purpose is
> to handle communication between HDMI connected devices over the CEC bus.
>
> Required properties:
> - - compatible : value should be following
> - "amlogic,meson-gx-ao-cec"
> + - compatible : value should be following depending on the SoC :
> + For GXBB, GXL, GXM and G12A (AO_CEC_A module) :
> + "amlogic,meson-gx-ao-cec"
> + For G12A (AO_CEC_B module) :
> + "amlogic,meson-g12a-ao-cec"

The driver uses "amlogic,meson-g12a-ao-cec-b", so there is a mismatch between
the bindings and the driver.

Please repost since it is important that the two correspond.

Thanks!

Hans

>
> - reg : Physical base address of the IP registers and length of memory
> mapped region.
>
> - interrupts : AO-CEC interrupt number to the CPU.
> - clocks : from common clock binding: handle to AO-CEC clock.
> - - clock-names : from common clock binding: must contain "core",
> - corresponding to entry in the clocks property.
> + - clock-names : from common clock binding, must contain :
> + For GXBB, GXL, GXM and G12A (AO_CEC_A module) :
> + - "core"
> + For G12A (AO_CEC_B module) :
> + - "oscin"
> + corresponding to entry in the clocks property.
> - hdmi-phandle: phandle to the HDMI controller
>
> Example:
>

\
 
 \ /
  Last update: 2019-03-27 13:40    [W:0.071 / U:0.836 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site