lkml.org 
[lkml]   [2019]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RESEND] i2c: imx: defer probing on dma channel request
On Wed, Mar 27, 2019 at 8:46 AM Laurentiu Tudor <laurentiu.tudor@nxp.com> wrote:
>
> Hello,
>
> Just FYI, I'm still seeing issues with the dma driver compiled _out_,
> trying to test i2c without dma support. I get the crash below in generic
> driver code later in the boot process, debug is in progress.

That probably means the dma API shouldn't return -EPROBE_DEFER when
the driver is not compiled in?

>
> P.S. This is seen on an NXP LS1043A chip.
>
> [ 5.152697] Unable to handle kernel NULL pointer dereference at
> virtual address 0000000000000010
> [ 5.161483] Mem abort info:
> [ 5.164311] ESR = 0x96000004
> [ 5.167407] Exception class = DABT (current EL), IL = 32 bits
> [ 5.173391] device_initialize: dev = ffff800027756808
> [ 5.178446] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using
> xhci-hcd
> [ 5.185489] SET = 0, FnV = 0
> [ 5.188532] EA = 0, S1PTW = 0
> [ 5.191676] Data abort info:
> [ 5.194599] ISV = 0, ISS = 0x00000004
> [ 5.198476] CM = 0, WnR = 0
> [ 5.201485] [0000000000000010] user address but active_mm is swapper
> [ 5.207894] Internal error: Oops: 96000004 [#1] PREEMPT SMP
> [ 5.213455] Modules linked in:
> [ 5.216502] CPU: 0 PID: 18 Comm: kworker/0:1 Not tainted
> 5.1.0-rc2-next-20190327-00021-g7b1a4c075381-dirty #15
> [ 5.226489] Hardware name: LS1043A RDB Board (DT)
> [ 5.231189] Workqueue: events deferred_probe_work_func
> [ 5.236317] pstate: a0000005 (NzCv daif -PAN -UAO)
> [ 5.241098] pc : device_reorder_to_tail+0x13c/0x1b8
> [ 5.245965] lr : device_reorder_to_tail+0xd8/0x1b8
> [ 5.250743] sp : ffff000011823c70
> [ 5.254046] x29: ffff000011823c70 x28: 0000000000000000
> [ 5.259347] x27: ffff0000117abcd8 x26: ffff000011293a20
> [ 5.264649] x25: ffff00001102a000 x24: ffff00001102a708
> [ 5.269950] x23: ffff00001102a700 x22: ffff000010d28000
> [ 5.275251] x21: ffff80007393b9a0 x20: fffffffffffffff8
> [ 5.280552] x19: ffff80007393b8f0 x18: ffffffffffffffff
> [ 5.285853] x17: 0000000000000002 x16: 0000000000000000
> [ 5.291154] x15: ffff00001127d6c8 x14: 000000000000017e
> [ 5.296454] x13: 0000000000000001 x12: 0000000000000000
> [ 5.301755] x11: 0000000000000000 x10: 0000000000000980
> [ 5.307055] x9 : ffff0000118238c0 x8 : ffff800073872560
> [ 5.312356] x7 : ffff800073871d00 x6 : 0000000000000058
> [ 5.317656] x5 : 000000000000000f x4 : 0000000000000100
> [ 5.322957] x3 : 000080006a351000 x2 : 0991ec05b7534200
> [ 5.328257] x1 : fffffffffffffff8 x0 : 0000000000000000
> [ 5.333560] Process kworker/0:1 (pid: 18, stack limit =
> 0x(____ptrval____))
> [ 5.340509] Call trace:
> [ 5.342945] device_reorder_to_tail+0x13c/0x1b8
> [ 5.347466] device_for_each_child+0x50/0xa8
> [ 5.351725] device_reorder_to_tail+0xc4/0x1b8
> [ 5.356157] device_pm_move_to_tail+0x34/0x50
> [ 5.360502] deferred_probe_work_func+0x64/0xa0
> [ 5.365023] process_one_work+0x1c8/0x320
> [ 5.369021] worker_thread+0x234/0x428
> [ 5.372761] kthread+0xf4/0x120
> [ 5.375892] ret_from_fork+0x10/0x18
> [ 5.379458] Code: 911c2318 911c02f7 d0004e19 b4000274 (f9400e84)
> [ 5.385541] ---[ end trace ab4b151d346a8d41 ]---
>
> ---
> Best Regards, Laurentiu
>
> On 25.03.2019 19:12, Steven Price wrote:
> > On 25/03/2019 15:30, laurentiu.tudor@nxp.com wrote:
> >> From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
> >>
> >> If the dma controller is not yet probed, defer i2c probe.
> >> The error path in probe was slightly modified (no functional change)
> >
> > There is a functional change for cases like:
> >
> >> ret = pm_runtime_get_sync(&pdev->dev);
> >> if (ret < 0)
> >> goto rpm_disable;
> >
> > ...as rpm_disable will no longer fall through to the call of
> > clk_disable_unprepare().
> >
> >> to avoid triggering this WARN_ON():
> >> "cg-pll0-div1 already disabled
> >> WARNING: CPU: 1 PID: 1 at drivers/clk/clk.c:828 clk_core_disable+0xa8/0xb0"
> >
> > I'm also not sure how this WARN_ON was hit. i2c_imx_probe() calls
> > clk_prepare_enable() which should increment the reference count. So it
> > should always be possible to decrememt the enable_count. What am I missing?
> >
> >> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
> >> ---
> >> drivers/i2c/busses/i2c-imx.c | 21 +++++++++++++--------
> >> 1 file changed, 13 insertions(+), 8 deletions(-)
> >>
> >> diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
> >> index 42fed40198a0..4e34b1572756 100644
> >> --- a/drivers/i2c/busses/i2c-imx.c
> >> +++ b/drivers/i2c/busses/i2c-imx.c
> >> @@ -1111,7 +1111,8 @@ static int i2c_imx_probe(struct platform_device *pdev)
> >> pdev->name, i2c_imx);
> >> if (ret) {
> >> dev_err(&pdev->dev, "can't claim irq %d\n", irq);
> >> - goto clk_disable;
> >> + clk_disable_unprepare(i2c_imx->clk);
> >> + return ret;
> >> }
> >>
> >> /* Init queue */
> >> @@ -1161,19 +1162,25 @@ static int i2c_imx_probe(struct platform_device *pdev)
> >> pm_runtime_mark_last_busy(&pdev->dev);
> >> pm_runtime_put_autosuspend(&pdev->dev);
> >>
> >> + /* Init DMA config if supported */
> >> + ret = i2c_imx_dma_request(i2c_imx, phy_addr);
> >> + if (ret) {
> >> + if (ret != -EPROBE_DEFER)
> >> + dev_info(&pdev->dev, "can't use DMA, using PIO instead.\n");
> >> + else
> >> + goto del_adapter;
> >> + }
> >> +
> >
> > This can be simplified by reversing the condition:
> >
> > if (ret) {
> > if (ret == -EPROBE_DEFER)
> > goto del_adapter;
> > dev_info();
> > }
> >
> > or even:
> >
> > if (ret == -EPROBE_DEFER)
> > goto del_adapter;
> > else if (ret)
> > dev_info();
> >
> >> dev_dbg(&i2c_imx->adapter.dev, "claimed irq %d\n", irq);
> >> dev_dbg(&i2c_imx->adapter.dev, "device resources: %pR\n", res);
> >> dev_dbg(&i2c_imx->adapter.dev, "adapter name: \"%s\"\n",
> >> i2c_imx->adapter.name);
> >>
> >> - /* Init DMA config if supported */
> >> - ret = i2c_imx_dma_request(i2c_imx, phy_addr);
> >> - if (ret < 0)
> >> - goto clk_notifier_unregister;
> >> -
> >> dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n");
> >> return 0; /* Return OK */
> >>
> >> +del_adapter:
> >> + i2c_del_adapter(&i2c_imx->adapter);
> >
> > This looks like a separate fix (previously the call to
> > i2c_add_numbered_adapter() was not undone in case of later errors). It
> > worth spelling this out in the commit message.
> >
> > Thanks,
> >
> > Steve
> >
> >> clk_notifier_unregister:
> >> clk_notifier_unregister(i2c_imx->clk, &i2c_imx->clk_change_nb);
> >> rpm_disable:
> >> @@ -1182,8 +1189,6 @@ static int i2c_imx_probe(struct platform_device *pdev)
> >> pm_runtime_set_suspended(&pdev->dev);
> >> pm_runtime_dont_use_autosuspend(&pdev->dev);
> >>
> >> -clk_disable:
> >> - clk_disable_unprepare(i2c_imx->clk);
> >> return ret;
> >> }
> >>
> >>
> >

\
 
 \ /
  Last update: 2019-03-27 19:48    [W:0.079 / U:0.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site