lkml.org 
[lkml]   [2019]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] arm64: dts: imx8qxp: Add EDMA0/EDMA1 nodes
Date
i.MX8QXP contains a total of 4 EDMA controllers of which
two are primarily for audio components and the other two
are for non-audio periperhals.

This patch adds the EDMA0/EDMA1 nodes used by audio peripherals.

EDMA0 contains channels for:
* ASRC0
* ESAI0
* SPDIF0
* SAI0, SAI1, SAI2, SAI3

EDMA1 contains channels for:
* ASRC1
* SAI4, SAI5

See chapter Audio DMA Memory Maps (2.2.3) from i.MX8QXP RM [1]

This patch is based on the dtsi file initially submitted by
Teo Hall in i.MX NXP internal tree.

[1] https://www.nxp.com/docs/en/reference-manual/IMX8DQXPRM.pdf

Cc: Teo Hall <teo.hall@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 72 ++++++++++++++++++++++
1 file changed, 72 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 0cb939861a60..9e959deb2499 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -182,6 +182,78 @@
#clock-cells = <1>;
};

+ edma0: dma-controller@591f0000 {
+ compatible = "fsl,imx8qm-edma";
+ reg = <0x59200000 0x10000>, /* asrc0 pair A input req */
+ <0x59210000 0x10000>, /* asrc0 pair B input req */
+ <0x59220000 0x10000>, /* asrc0 pair C input req */
+ <0x59230000 0x10000>, /* asrc0 pair A output req */
+ <0x59240000 0x10000>, /* asrc0 pair B output req */
+ <0x59250000 0x10000>, /* asrc0 pair C output req */
+ <0x59260000 0x10000>, /* esai0 rx */
+ <0x59270000 0x10000>, /* esai0 tx */
+ <0x59280000 0x10000>, /* spdif0 rx */
+ <0x59290000 0x10000>, /* spdif0 tx */
+ <0x592c0000 0x10000>, /* sai0 rx */
+ <0x592d0000 0x10000>, /* sai0 tx */
+ <0x592e0000 0x10000>, /* sai1 rx */
+ <0x592f0000 0x10000>, /* sai1 tx */
+ #dma-cells = <3>;
+ shared-interrupt;
+ dma-channels = <14>;
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, /* asrc 0 */
+ <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, /* esai0 */
+ <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, /* spdif0 */
+ <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, /* sai0 */
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, /* sai1 */
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ interrupt-names = "edma0-chan0-rx", "edma0-chan1-rx", /* asrc0 */
+ "edma0-chan2-rx", "edma0-chan3-tx",
+ "edma0-chan4-tx", "edma0-chan5-tx",
+ "edma0-chan6-rx", "edma0-chan7-tx", /* esai0 */
+ "edma0-chan8-rx", "edma0-chan9-tx", /* spdif0 */
+ "edma0-chan12-rx", "edma0-chan13-tx", /* sai0 */
+ "edma0-chan14-rx", "edma0-chan15-tx", /* sai1 */
+ };
+
+ edma1: dma-controller@599F0000 {
+ compatible = "fsl,imx8qm-edma";
+ reg = <0x0 0x59A00000 0x0 0x10000>, /* asrc1 */
+ <0x0 0x59A10000 0x0 0x10000>,
+ <0x0 0x59A20000 0x0 0x10000>,
+ <0x0 0x59A30000 0x0 0x10000>,
+ <0x0 0x59A40000 0x0 0x10000>,
+ <0x0 0x59A50000 0x0 0x10000>,
+ <0x0 0x59A80000 0x0 0x10000>, /* sai4 rx */
+ <0x0 0x59A90000 0x0 0x10000>, /* sai4 tx */
+ <0x0 0x59AA0000 0x0 0x10000>; /* sai5 tx */
+ #dma-cells = <3>;
+ shared-interrupt;
+ dma-channels = <9>;
+ interrupts = <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, /* asrc 1 */
+ <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, /* sai4 */
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; /* sai5 */
+ interrupt-names = "edma1-chan0-rx", "edma1-chan1-rx", /* asrc1 */
+ "edma1-chan2-rx", "edma1-chan3-tx",
+ "edma1-chan4-tx", "edma1-chan5-tx",
+ "edma1-chan8-rx", "edma1-chan9-tx", /* sai4 */
+ "edma1-chan10-tx"; /* sai5 */
+ };
+
adma_lpuart0: serial@5a060000 {
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x5a060000 0x1000>;
--
2.17.1
\
 
 \ /
  Last update: 2019-03-26 10:44    [W:2.389 / U:2.668 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site