lkml.org 
[lkml]   [2019]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [Milbeaut PATCH v0.4 0/2] mmc: sdhci_f_sdh30: Add support for Milbeaut
Date

Hi All

I'm sorry, I had mistaken the Subject format of my patch series.
I will send new patches with right format.
Please ignore this series.

Orito

> The following patches add driver support for SD Host controller on
> Socionext's Milbeaut M10V platforms.
>
> SD Host controller on Milbeaut is consist of two controller parts.
> One is core controller F_SDH30, this is similar to sdhci-fujitsu
> controller.
> Another is bridge controller. This bridge controller is not compatible
> with sdhci-fujitsu controller. This is special for Milbeaut series.
>
> It has the several parts,
> - reset control
> - clock enable / select for SDR50/25/12
> - hold control of DATA/CMD line
> - select characteristics for WP/CD/LED line
> - Re-tuning control for mode3
> - Capability setting
> Timeout Clock / Base Clock / Timer Count for Re-Tuning /
> Debounce period
> These requires special procedures at reset or clock enable/change or
> further tuning of clock.
>
> Takao Orito (2):
> dt-bindings: mmc: sdhci-fujitsu.txt: add miilbeaut driver
> mmc: sdhci_f_sdh30: Add support for Milbeaut M10V host controller
>
> .../devicetree/bindings/mmc/sdhci-fujitsu.txt | 22 +-
> drivers/mmc/host/sdhci_f_sdh30.c | 324 +++++++++++++++++++--
> 2 files changed, 315 insertions(+), 31 deletions(-)
>
> --
> 1.9.1
>

--
Takao Orito <orito.takao@socionext.com>
\
 
 \ /
  Last update: 2019-03-26 06:43    [W:0.107 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site