lkml.org 
[lkml]   [2019]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] arm64: dts: msm8998: Add UFS phy reset
On Tue, Mar 26, 2019 at 10:14 AM Marc Gonzalez <marc.w.gonzalez@free.fr> wrote:
>
> On 26/03/2019 18:05, Evan Green wrote:
>
> > With the new refactoring at [1], the UFS phy now controls its own
> > destiny in toggling the phy reset bit within the UFS host controller.
> > Add the DT pieces needed to 1) expose the reset controller from the
> > HC, and 2) use it from the PHY. This series is based atop linux-next
> > plus Marc's series at [2].
> >
> > Signed-off-by: Evan Green <evgreen@chromium.org>
> >
> > [1] https://lore.kernel.org/lkml/20190321171800.104681-1-evgreen@chromium.org/
> > [2] https://lore.kernel.org/lkml/43768d77-80b7-9cdc-b6e0-08ec4a026c21@free.fr/
> >
> > ---
> > I haven't tested this. Marc, I'm hoping you'll test this out and hijack this
> > patch if it needs any fixups.
> >
> > arch/arm64/boot/dts/qcom/msm8998.dtsi | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> > index 3d0aeb3211de..d59a2c5fe83a 100644
> > --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> > @@ -990,6 +990,7 @@
> > interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> > phys = <&ufsphy_lanes>;
> > phy-names = "ufsphy";
> > + #reset-cells = <1>;
> > lanes-per-direction = <2>;
> > power-domains = <&gcc UFS_GDSC>;
> >
> > @@ -1039,6 +1040,7 @@
> > <&gcc GCC_UFS_CLKREF_CLK>,
> > <&gcc GCC_UFS_PHY_AUX_CLK>;
> >
> > + resets = <&ufshc 0>;
> > ufsphy_lanes: lanes@1da7400 {
> > reg = <0x01da7400 0x128>,
> > <0x01da7600 0x1fc>,
> >
>
> If it's OK with you, I plan to test this patch tomorrow, and simply squash it
> into my UFS DT submission.

Sounds good, go ahead.

\
 
 \ /
  Last update: 2019-03-26 20:40    [W:0.058 / U:0.712 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site