lkml.org 
[lkml]   [2019]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 8/8] vfio/mdev: Improve the create/remove sequence
Date


> -----Original Message-----
> From: Alex Williamson <alex.williamson@redhat.com>
> Sent: Monday, March 25, 2019 7:06 PM
> To: Parav Pandit <parav@mellanox.com>
> Cc: kvm@vger.kernel.org; linux-kernel@vger.kernel.org;
> kwankhede@nvidia.com
> Subject: Re: [PATCH 8/8] vfio/mdev: Improve the create/remove sequence
>
> On Mon, 25 Mar 2019 23:34:28 +0000
> Parav Pandit <parav@mellanox.com> wrote:
>
> > > -----Original Message-----
> > > From: Alex Williamson <alex.williamson@redhat.com>
> > > Sent: Monday, March 25, 2019 6:19 PM
> > > To: Parav Pandit <parav@mellanox.com>
> > > Cc: kvm@vger.kernel.org; linux-kernel@vger.kernel.org;
> > > kwankhede@nvidia.com
> > > Subject: Re: [PATCH 8/8] vfio/mdev: Improve the create/remove
> > > sequence
> > >
> > > On Fri, 22 Mar 2019 18:20:35 -0500
> > > Parav Pandit <parav@mellanox.com> wrote:
> > >
> > > > There are five problems with current code structure.
> > > > 1. mdev device is placed on the mdev bus before it is created in
> > > > the vendor driver. Once a device is placed on the mdev bus without
> > > > creating its supporting underlying vendor device, an open() can
> > > > get triggered by userspace on partially initialized device.
> > > > Below ladder diagram highlight it.
> > > >
> > > > cpu-0 cpu-1
> > > > ----- -----
> > > > create_store()
> > > > mdev_create_device()
> > > > device_register()
> > > > ...
> > > > vfio_mdev_probe()
> > > > ...creates char device
> > > > vfio_mdev_open()
> > > > parent->ops->open(mdev)
> > > > vfio_ap_mdev_open()
> > > > matrix_mdev = NULL
> > > > [...]
> > > > parent->ops->create()
> > > > vfio_ap_mdev_create()
> > > > mdev_set_drvdata(mdev, matrix_mdev);
> > > > /* Valid pointer set above */
> > > >
> > > > 2. Current creation sequence is,
> > > > parent->ops_create()
> > > > groups_register()
> > > >
> > > > Remove sequence is,
> > > > parent->ops->remove()
> > > > groups_unregister()
> > > > However, remove sequence should be exact mirror of creation
> sequence.
> > > > Once this is achieved, all users of the mdev will be terminated
> > > > first before removing underlying vendor device.
> > > > (Follow standard linux driver model).
> > > > At that point vendor's remove() ops shouldn't failed because
> > > > device is taken off the bus that should terminate the users.
> > > >
> > > > 3. Additionally any new mdev driver that wants to work on mdev
> > > > device during probe() routine registered using
> > > > mdev_register_driver() needs to get stable mdev structure.
> > > >
> > > > 4. In following sequence, child devices created while removing
> > > > mdev parent device can be left out, or it may lead to race of
> > > > removing half initialized child mdev devices.
> > > >
> > > > issue-1:
> > > > --------
> > > > cpu-0 cpu-1
> > > > ----- -----
> > > > mdev_unregister_device()
> > > > device_for_each_child()
> > > > mdev_device_remove_cb()
> > > > mdev_device_remove()
> > > > create_store()
> > > > mdev_device_create() [...]
> > > > device_register()
> > > > parent_remove_sysfs_files()
> > > > /* BUG: device added by cpu-0
> > > > * whose parent is getting removed.
> > > > */
> > > >
> > > > issue-2:
> > > > --------
> > > > cpu-0 cpu-1
> > > > ----- -----
> > > > create_store()
> > > > mdev_device_create() [...]
> > > > device_register()
> > > >
> > > > [...] mdev_unregister_device()
> > > > device_for_each_child()
> > > > mdev_device_remove_cb()
> > > > mdev_device_remove()
> > > >
> > > > mdev_create_sysfs_files()
> > > > /* BUG: create is adding
> > > > * sysfs files for a device
> > > > * which is undergoing removal.
> > > > */
> > > > parent_remove_sysfs_files()
> > >
> > > In both cases above, it looks like the device will hold a reference
> > > to the parent, so while there is a race, the parent object isn't released.
> > Yes, parent object is not released but parent fields are not stable.
> >
> > >
> > > >
> > > > 5. Below crash is observed when user initiated remove is in
> > > > progress and mdev_unregister_driver() completes parent
> unregistration.
> > > >
> > > > cpu-0 cpu-1
> > > > ----- -----
> > > > remove_store()
> > > > mdev_device_remove()
> > > > active = false;
> > > > mdev_unregister_device()
> > > > remove type
> > > > [...]
> > > > mdev_remove_ops() crashes.
> > > >
> > > > This is similar race like create() racing with mdev_unregister_device().
> > >
> > > Not sure I catch this, the device should have a reference to the
> > > parent, and we don't specifically clear parent->ops, so what's
> > > getting removed that causes this oops? Is .remove pointing at bad text
> regardless?
> > >
> > I guess the mdev_attr_groups being stale now.
> >
> > > > mtty mtty: MDEV: Registered
> > > > iommu: Adding device 83b8f4f2-509f-382f-3c1e-e6bfe0fa1001 to group
> > > > 57 vfio_mdev 83b8f4f2-509f-382f-3c1e-e6bfe0fa1001: MDEV: group_id
> > > > = 57 mdev_device_remove sleep started mtty mtty: MDEV:
> > > > Unregistering
> > > > mtty_dev: Unloaded!
> > > > BUG: unable to handle kernel paging request at ffffffffc027d668
> > > > PGD
> > > > af9818067 P4D af9818067 PUD af981a067 PMD 8583c3067 PTE 0
> > > > Oops: 0000 [#1] SMP PTI
> > > > CPU: 15 PID: 3517 Comm: bash Kdump: loaded Not tainted
> > > > 5.0.0-rc7-vdevbus+ #2 Hardware name: Supermicro
> > > > SYS-6028U-TR4+/X10DRU-i+, BIOS 2.0b 08/09/2016
> > > > RIP: 0010:mdev_device_remove_ops+0x1a/0x50 [mdev] Call Trace:
> > > > mdev_device_remove+0xef/0x130 [mdev]
> > > > remove_store+0x77/0xa0 [mdev]
> > > > kernfs_fop_write+0x113/0x1a0
> > > > __vfs_write+0x33/0x1b0
> > > > ? rcu_read_lock_sched_held+0x64/0x70
> > > > ? rcu_sync_lockdep_assert+0x2a/0x50 ?
> > > > __sb_start_write+0x121/0x1b0 ? vfs_write+0x17c/0x1b0
> > > > vfs_write+0xad/0x1b0
> > > > ? trace_hardirqs_on_thunk+0x1a/0x1c
> > > > ksys_write+0x55/0xc0
> > > > do_syscall_64+0x5a/0x210
> > > >
> > > > Therefore, mdev core is improved in following ways to overcome
> > > > above issues.
> > > >
> > > > 1. Before placing mdev devices on the bus, perform vendor drivers
> > > > creation which supports the mdev creation.
> > > > This ensures that mdev specific all necessary fields are
> > > > initialized before a given mdev can be accessed by bus driver.
> > > >
> > > > 2. During remove flow, first remove the device from the bus. This
> > > > ensures that any bus specific devices and data is cleared.
> > > > Once device is taken of the mdev bus, perform remove() of mdev
> > > > from the vendor driver.
> > > >
> > > > 3. Linux core device model provides way to register and auto
> > > > unregister the device sysfs attribute groups at dev->groups.
> > > > Make use of this groups to let core create the groups and simplify
> > > > code to avoid explicit groups creation and removal.
> > > >
> > > > 4. Wait for any ongoing mdev create() and remove() to finish
> > > > before unregistering parent device using srcu. This continues to
> > > > allow multiple create and remove to progress in parallel. At the
> > > > same time guard parent removal while parent is being access by
> > > > create() and remove
> > > callbacks.
> > >
> > > So there should be 4-5 separate patches here? Wishful thinking?
> > >
> > create, remove racing with unregister is handled using srcu.
> > Change-3 cannot be done without fixing the sequence so it should be in
> patch that fixes it.
> > Change described changes 1-2-3 are just one change. It is just the patch
> description to bring clarity.
> > Change-4 can be possibly done as split to different patch.
> >
> > > > Fixes: 7b96953bc640 ("vfio: Mediated device Core driver")
> > > > Signed-off-by: Parav Pandit <parav@mellanox.com>
> > > > ---
> > > > drivers/vfio/mdev/mdev_core.c | 142 +++++++++++++++++++++---------
> -----
> > > ----
> > > > drivers/vfio/mdev/mdev_private.h | 7 +-
> > > > drivers/vfio/mdev/mdev_sysfs.c | 6 +-
> > > > 3 files changed, 84 insertions(+), 71 deletions(-)
> > > >
> > > > diff --git a/drivers/vfio/mdev/mdev_core.c
> > > > b/drivers/vfio/mdev/mdev_core.c index 944a058..8fe0ed1 100644
> > > > --- a/drivers/vfio/mdev/mdev_core.c
> > > > +++ b/drivers/vfio/mdev/mdev_core.c
> > > > @@ -84,6 +84,7 @@ static void mdev_release_parent(struct kref *kref)
> > > > ref);
> > > > struct device *dev = parent->dev;
> > > >
> > > > + cleanup_srcu_struct(&parent->unreg_srcu);
> > > > kfree(parent);
> > > > put_device(dev);
> > > > }
> > > > @@ -103,56 +104,30 @@ static inline void mdev_put_parent(struct
> > > mdev_parent *parent)
> > > > kref_put(&parent->ref, mdev_release_parent); }
> > > >
> > > > -static int mdev_device_create_ops(struct kobject *kobj,
> > > > - struct mdev_device *mdev)
> > > > +static int mdev_device_must_remove(struct mdev_device *mdev)
> > >
> > > Naming is off here, mdev_device_remove_common()?
> > >
> > Yes, sounds better.
> >
> > > > {
> > > > - struct mdev_parent *parent = mdev->parent;
> > > > + struct mdev_parent *parent;
> > > > + struct mdev_type *type;
> > > > int ret;
> > > >
> > > > - ret = parent->ops->create(kobj, mdev);
> > > > - if (ret)
> > > > - return ret;
> > > > + type = to_mdev_type(mdev->type_kobj);
> > > >
> > > > - ret = sysfs_create_groups(&mdev->dev.kobj,
> > > > - parent->ops->mdev_attr_groups);
> > > > + mdev_remove_sysfs_files(&mdev->dev, type);
> > > > + device_del(&mdev->dev);
> > > > + parent = mdev->parent;
> > > > + ret = parent->ops->remove(mdev);
> > > > if (ret)
> > > > - parent->ops->remove(mdev);
> > > > + dev_err(&mdev->dev, "Remove failed: err=%d\n", ret);
> > >
> > > Let the caller decide whether to be verbose with the error, parent
> > > removal might want to warn, sysfs remove might just return an error.
> > >
> > I didn't follow. Caller meaning mdev_device_remove_common() or vendor
> driver?
>
> I mean the callback iterator on the parent remove can do a WARN_ON if this
> returns an error while the device remove path can silently return -EBUSY, the
> common function doesn't need to decide whether the parent ops remove
> function deserves a dev_err.
>
Ok. I understood.
But device remove returning silent -EBUSY looks an error that should get logged in, because this is something not expected.
Its probably late for sysfs layer to return report an error by that time it prints device name, because put_device() is done.
So if remove() returns an error, I think its legitimate failure to do WARN_ON or dev_err().

> > > >
> > > > + /* Balances with device_initialize() */
> > > > + put_device(&mdev->dev);
> > > > return ret;
> > > > }
> > > >
> > > > -/*
> > > > - * mdev_device_remove_ops gets called from sysfs's 'remove' and
> > > > when parent
> > > > - * device is being unregistered from mdev device framework.
> > > > - * - 'force_remove' is set to 'false' when called from sysfs's 'remove'
> which
> > > > - * indicates that if the mdev device is active, used by VMM or
> userspace
> > > > - * application, vendor driver could return error then don't remove
> the
> > > device.
> > > > - * - 'force_remove' is set to 'true' when called from
> > > mdev_unregister_device()
> > > > - * which indicate that parent device is being removed from mdev
> device
> > > > - * framework so remove mdev device forcefully.
> > > > - */
> > > > -static int mdev_device_remove_ops(struct mdev_device *mdev, bool
> > > > force_remove) -{
> > > > - struct mdev_parent *parent = mdev->parent;
> > > > - int ret;
> > > > -
> > > > - /*
> > > > - * Vendor driver can return error if VMM or userspace application is
> > > > - * using this mdev device.
> > > > - */
> > > > - ret = parent->ops->remove(mdev);
> > > > - if (ret && !force_remove)
> > > > - return ret;
> > > > -
> > > > - sysfs_remove_groups(&mdev->dev.kobj, parent->ops-
> > > >mdev_attr_groups);
> > > > - return 0;
> > > > -}
> > >
> > > Seems like there's easily a separate patch in pushing the
> > > create/remove ops into the calling function and separating for the
> > > iterator callback, that would make this easier to review.
> > >
> > > > -
> > > > static int mdev_device_remove_cb(struct device *dev, void *data) {
> > > > if (dev_is_mdev(dev))
> > > > - mdev_device_remove(dev, true);
> > > > -
> > > > + mdev_device_must_remove(to_mdev_device(dev));
> > > > return 0;
> > > > }
> > > >
> > > > @@ -194,6 +169,7 @@ int mdev_register_device(struct device *dev,
> > > > const
> > > struct mdev_parent_ops *ops)
> > > > }
> > > >
> > > > kref_init(&parent->ref);
> > > > + init_srcu_struct(&parent->unreg_srcu);
> > > >
> > > > parent->dev = dev;
> > > > parent->ops = ops;
> > > > @@ -214,6 +190,7 @@ int mdev_register_device(struct device *dev,
> > > > const
> > > struct mdev_parent_ops *ops)
> > > > if (ret)
> > > > dev_warn(dev, "Failed to create compatibility class link\n");
> > > >
> > > > + rcu_assign_pointer(parent->self, parent);
> > > > list_add(&parent->next, &parent_list);
> > > > mutex_unlock(&parent_list_lock);
> > > >
> > > > @@ -244,21 +221,36 @@ void mdev_unregister_device(struct device
> > > > *dev)
> > > >
> > > > mutex_lock(&parent_list_lock);
> > > > parent = __find_parent_device(dev);
> > > > -
> > > > if (!parent) {
> > > > mutex_unlock(&parent_list_lock);
> > > > return;
> > > > }
> > > > + list_del(&parent->next);
> > > > + mutex_unlock(&parent_list_lock);
> > > > +
> > > > dev_info(dev, "MDEV: Unregistering\n");
> > > >
> > > > - list_del(&parent->next);
> > > > + /* Publish that this mdev parent is unregistering. So any new
> > > > + * create/remove cannot start on this parent anymore by user.
> > > > + */
> > >
> > > Comment style, we're not in netdev.
> > Yep. Will fix it.
> > >
> > > > + rcu_assign_pointer(parent->self, NULL);
> > > > +
> > > > + /*
> > > > + * Wait for any active create() or remove() mdev ops on the parent
> > > > + * to complete.
> > > > + */
> > > > + synchronize_srcu(&parent->unreg_srcu);
> > > > +
> > > > + /* At this point it is confirmed that any pending user initiated
> > > > + * create or remove callbacks accessing the parent are completed.
> > > > + * It is safe to remove the parent now.
> > > > + */
> > > > class_compat_remove_link(mdev_bus_compat_class, dev, NULL);
> > > >
> > > > device_for_each_child(dev, NULL, mdev_device_remove_cb);
> > > >
> > > > parent_remove_sysfs_files(parent);
> > > >
> > > > - mutex_unlock(&parent_list_lock);
> > > > mdev_put_parent(parent);
> > > > }
> > > > EXPORT_SYMBOL(mdev_unregister_device);
> > > > @@ -278,14 +270,24 @@ static void mdev_device_release(struct
> > > > device
> > > > *dev) int mdev_device_create(struct kobject *kobj, struct device
> > > > *dev, uuid_le uuid) {
> > > > int ret;
> > > > + struct mdev_parent *valid_parent;
> > > > struct mdev_device *mdev, *tmp;
> > > > struct mdev_parent *parent;
> > > > struct mdev_type *type = to_mdev_type(kobj);
> > > > + int srcu_idx;
> > > >
> > > > parent = mdev_get_parent(type->parent);
> > > > if (!parent)
> > > > return -EINVAL;
> > > >
> > > > + srcu_idx = srcu_read_lock(&parent->unreg_srcu);
> > > > + valid_parent = srcu_dereference(parent->self, &parent->unreg_srcu);
> > > > + if (!valid_parent) {
> > > > + /* parent is undergoing unregistration */
> > > > + ret = -ENODEV;
> > > > + goto mdev_fail;
> > > > + }
> > > > +
> > > > mutex_lock(&mdev_list_lock);
> > > >
> > > > /* Check for duplicate */
> > > > @@ -310,68 +312,76 @@ int mdev_device_create(struct kobject *kobj,
> > > > struct device *dev, uuid_le uuid)
> > > >
> > > > mdev->parent = parent;
> > > >
> > > > + device_initialize(&mdev->dev);
> > > > mdev->dev.parent = dev;
> > > > mdev->dev.bus = &mdev_bus_type;
> > > > mdev->dev.release = mdev_device_release;
> > > > + mdev->dev.groups = type->parent->ops->mdev_attr_groups;
> > > > dev_set_name(&mdev->dev, "%pUl", uuid.b);
> > > >
> > > > - ret = device_register(&mdev->dev);
> > > > + ret = type->parent->ops->create(kobj, mdev);
> > > > if (ret)
> > > > - goto mdev_fail;
> > > > + goto create_fail;
> > > >
> > > > - ret = mdev_device_create_ops(kobj, mdev);
> > > > + ret = device_add(&mdev->dev);
> > >
> > > Separating device_initialize() and device_add() also looks like a
> > > separate patch, then the srcu could be added at the end. Thanks,
> > >
> > > Alex
> >
> > I saw little more core generated that way, but I think its fine.
> > Basically, create/remove callback sequencing that does the
> > device_inititailze/add etc in one patch and User side race handling using
> srcu in another patch.
> > Sounds good?
>
> Splitting device_register into device_intialize/device_add solves the first
> issue alone, that can be one patch.
Yes, once this is done, mdev_device_create_ops() is just a one line wrapper to groups creation.
Hence I was considering to do in same patch, but its fine as a separate clean up patch.
More split details below.

> Creating the common remove function
> seems like a logical next patch. The third patch could be using the driver-
> core group attribute via those paths. Another patch could then incorporate
> the srcu code to gate the create/remove around parent removal. This
> basically matches your steps to address these issues, it seems very split-able.
> Thanks,
>
So I reworked to split this one patch to following smaller refactor and fixes.
1. use of device_inititalize/add/remove helpers without fixing the sequence as prep patch
2. fix the create/remove sequence
3. factor out groups creation
4. remove helper function
5. srcu fix

> Alex

\
 
 \ /
  Last update: 2019-03-26 02:44    [W:0.199 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site