lkml.org 
[lkml]   [2019]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] staging: octeon-ethernet: fix incorrect PHY mode
Date
When connecting PHY, we set the mode to PHY_INTERFACE_MODE_GMII which is
not always correct. Specifically on boards where RGMII_RXID is needed
networking now longer works with at803x after commit 6d4cd041f0af
("net: phy: at803x: disable delay only for RGMII mode").

Fix by passing the correct mode. Tested on EdgeRouter Lite
(RGMII_RXID, at803x PHY) and D-Link DSR-500N (RGMII, broadcom PHY).

Fixes: 6d4cd041f0af ("net: phy: at803x: disable delay only for RGMII mode")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
---
drivers/staging/octeon/ethernet-mdio.c | 2 +-
drivers/staging/octeon/ethernet.c | 40 +++++++++++++++++++++---
drivers/staging/octeon/octeon-ethernet.h | 4 ++-
3 files changed, 39 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c
index d6248eecf123..2aee64fdaec5 100644
--- a/drivers/staging/octeon/ethernet-mdio.c
+++ b/drivers/staging/octeon/ethernet-mdio.c
@@ -163,7 +163,7 @@ int cvm_oct_phy_setup_device(struct net_device *dev)
goto no_phy;

phydev = of_phy_connect(dev, phy_node, cvm_oct_adjust_link, 0,
- PHY_INTERFACE_MODE_GMII);
+ priv->phy_mode);
of_node_put(phy_node);

if (!phydev)
diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c
index ce61c5670ef6..986db76705cc 100644
--- a/drivers/staging/octeon/ethernet.c
+++ b/drivers/staging/octeon/ethernet.c
@@ -653,14 +653,37 @@ static struct device_node *cvm_oct_node_for_port(struct device_node *pip,
return np;
}

-static void cvm_set_rgmii_delay(struct device_node *np, int iface, int port)
+static void cvm_set_rgmii_delay(struct octeon_ethernet *priv, int iface,
+ int port)
{
+ struct device_node *np = priv->of_node;
u32 delay_value;
+ bool rx_delay;
+ bool tx_delay;

- if (!of_property_read_u32(np, "rx-delay", &delay_value))
+ /* By default, both RX/TX delay is enabled in
+ * __cvmx_helper_rgmii_enable().
+ */
+ rx_delay = true;
+ tx_delay = true;
+
+ if (!of_property_read_u32(np, "rx-delay", &delay_value)) {
cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(port, iface), delay_value);
- if (!of_property_read_u32(np, "tx-delay", &delay_value))
+ rx_delay = delay_value > 0;
+ }
+ if (!of_property_read_u32(np, "tx-delay", &delay_value)) {
cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(port, iface), delay_value);
+ tx_delay = delay_value > 0;
+ }
+
+ if (!rx_delay && !tx_delay)
+ priv->phy_mode = PHY_INTERFACE_MODE_RGMII_ID;
+ else if (!rx_delay)
+ priv->phy_mode = PHY_INTERFACE_MODE_RGMII_RXID;
+ else if (!tx_delay)
+ priv->phy_mode = PHY_INTERFACE_MODE_RGMII_TXID;
+ else
+ priv->phy_mode = PHY_INTERFACE_MODE_RGMII;
}

static int cvm_oct_probe(struct platform_device *pdev)
@@ -825,6 +848,7 @@ static int cvm_oct_probe(struct platform_device *pdev)
priv->port = port;
priv->queue = cvmx_pko_get_base_queue(priv->port);
priv->fau = fau - cvmx_pko_get_num_queues(port) * 4;
+ priv->phy_mode = PHY_INTERFACE_MODE_NA;
for (qos = 0; qos < 16; qos++)
skb_queue_head_init(&priv->tx_free_list[qos]);
for (qos = 0; qos < cvmx_pko_get_num_queues(port);
@@ -856,6 +880,7 @@ static int cvm_oct_probe(struct platform_device *pdev)
break;

case CVMX_HELPER_INTERFACE_MODE_SGMII:
+ priv->phy_mode = PHY_INTERFACE_MODE_SGMII;
dev->netdev_ops = &cvm_oct_sgmii_netdev_ops;
strcpy(dev->name, "eth%d");
break;
@@ -865,11 +890,16 @@ static int cvm_oct_probe(struct platform_device *pdev)
strcpy(dev->name, "spi%d");
break;

- case CVMX_HELPER_INTERFACE_MODE_RGMII:
case CVMX_HELPER_INTERFACE_MODE_GMII:
+ priv->phy_mode = PHY_INTERFACE_MODE_GMII;
+ dev->netdev_ops = &cvm_oct_rgmii_netdev_ops;
+ strcpy(dev->name, "eth%d");
+ break;
+
+ case CVMX_HELPER_INTERFACE_MODE_RGMII:
dev->netdev_ops = &cvm_oct_rgmii_netdev_ops;
strcpy(dev->name, "eth%d");
- cvm_set_rgmii_delay(priv->of_node, interface,
+ cvm_set_rgmii_delay(priv, interface,
port_index);
break;
}
diff --git a/drivers/staging/octeon/octeon-ethernet.h b/drivers/staging/octeon/octeon-ethernet.h
index 4a07e7f43d12..be570d33685a 100644
--- a/drivers/staging/octeon/octeon-ethernet.h
+++ b/drivers/staging/octeon/octeon-ethernet.h
@@ -12,7 +12,7 @@
#define OCTEON_ETHERNET_H

#include <linux/of.h>
-
+#include <linux/phy.h>
#include <asm/octeon/cvmx-helper-board.h>

/**
@@ -33,6 +33,8 @@ struct octeon_ethernet {
* cvmx_helper_interface_mode_t
*/
int imode;
+ /* PHY mode */
+ phy_interface_t phy_mode;
/* List of outstanding tx buffers per queue */
struct sk_buff_head tx_free_list[16];
unsigned int last_speed;
--
2.17.0
\
 
 \ /
  Last update: 2019-03-25 21:48    [W:0.488 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site