Messages in this thread | | | Subject | Re: [RFC PATCH v2 2/5] dt-bindings: mtd: Add binding documentation for Hyperbus memory devices | From | Sergei Shtylyov <> | Date | Sun, 24 Mar 2019 19:18:56 +0300 |
| |
Hello!
On 03/21/2019 08:45 PM, Vignesh Raghavendra wrote:
> Add DT binding documentation for Hyperbus memory devices. Only > Hyperflash is supported at the moment. > > Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> > --- > Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt | 6 ++++++ > 1 file changed, 6 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt > > diff --git a/Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt b/Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt > new file mode 100644 > index 000000000000..cb408f80b868 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt > @@ -0,0 +1,6 @@ > +Bindings for Hyperflash NOR flash chips compliant with Cypress Hyperbus > +specification and supports Cypress CFI specification 1.5 command set. > + > +Required properties: > +- compatible : "cypress,hyperflash" for Hyperflash NOR chips
What about "cfi-flash", shouldn't it be also specified?
> +- reg : Address where flash's memory mapped space
MBR, Sergei
| |