lkml.org 
[lkml]   [2019]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH] block/mq: blk map queues by core id
From
Date


On 03/23/2019 02:34 PM, luferry wrote:
>
> I just bought one vm , so i cannot access to hypervisor. I will try to build the environment on my desktop.
> I'm sure about something.
> The hypervisor is KVM and disk driver is virtio-blk.
> [root@blk-mq ~]# dmesg |grep KVM
> [ 0.000000] Hypervisor detected: KVM
> [ 0.186330] Booting paravirtualized kernel on KVM
> [ 0.279106] KVM setup async PF for cpu 0
> [ 0.420819] KVM setup async PF for cpu 1
> [ 0.421682] KVM setup async PF for cpu 2
> [ 0.422113] KVM setup async PF for cpu 3
> [ 0.422434] KVM setup async PF for cpu 4
> [ 0.422434] KVM setup async PF for cpu 5
> [ 0.423312] KVM setup async PF for cpu 6
> [ 0.423394] KVM setup async PF for cpu 7
> [ 0.424125] KVM setup async PF for cpu 8
> [ 0.424414] KVM setup async PF for cpu 9
> [ 0.424415] KVM setup async PF for cpu 10
> [ 0.425329] KVM setup async PF for cpu 11
> [ 0.425420] KVM setup async PF for cpu 12
> [ 0.426156] KVM setup async PF for cpu 13
> [ 0.426431] KVM setup async PF for cpu 14
> [ 0.426431] KVM setup async PF for cpu 15
> [root@blk-mq ~]# lspci |grep block
> 00:05.0 SCSI storage controller: Red Hat, Inc. Virtio block device
> 00:06.0 SCSI storage controller: Red Hat, Inc. Virtio block device
>
> [root@blk-mq ~]# lscpu
> Architecture: x86_64
> CPU op-mode(s): 32-bit, 64-bit
> Byte Order: Little Endian
> CPU(s): 16
> On-line CPU(s) list: 0-15
> Thread(s) per core: 2
> Core(s) per socket: 8
>
> [root@blk-mq ~]# ls /sys/block/vdb/mq/
> 0 1 2 3
>
> [root@blk-mq ~]# cat /proc/cpuinfo |egrep 'processor|core id'
> processor : 0
> core id : 0
> processor : 1
> core id : 0
> processor : 2
> core id : 1
> processor : 3
> core id : 1
> processor : 4
> core id : 2
> processor : 5
> core id : 2
> processor : 6
> core id : 3
> processor : 7
> core id : 3
> processor : 8
> core id : 4
> processor : 9
> core id : 4
> processor : 10
> core id : 5
> processor : 11
> core id : 5
> processor : 12
> core id : 6
> processor : 13
> core id : 6
> processor : 14
> core id : 7
> processor : 15
> core id : 7
>
> --before this patch--
> [root@blk-mq ~]# cat /sys/block/vdb/mq/*/cpu_list
> 0, 4, 5, 8, 9, 12, 13
> 1
> 2, 6, 7, 10, 11, 14, 15
> 3
>
> --after this patch--
> [root@blk-mq ~]# cat /sys/block/vdb/mq/*/cpu_list
> 0, 4, 5, 12, 13
> 1, 6, 7, 14, 15
> 2, 8, 9
> 3, 10, 11
>
>
> I add dump_stack insert blk_mq_map_queues.
>
> [ 1.378680] Call Trace:
> [ 1.378690] dump_stack+0x5a/0x73
> [ 1.378695] blk_mq_map_queues+0x29/0xb0
> [ 1.378700] blk_mq_alloc_tag_set+0x1bd/0x2d0
> [ 1.378705] virtblk_probe+0x1ae/0x8e4 [virtio_blk]
> [ 1.378709] virtio_dev_probe+0x18a/0x230 [virtio]
> [ 1.378713] really_probe+0x215/0x3f0
> [ 1.378716] driver_probe_device+0x115/0x130
> [ 1.378718] device_driver_attach+0x50/0x60
> [ 1.378720] __driver_attach+0xbd/0x140
> [ 1.378722] ? device_driver_attach+0x60/0x60
> [ 1.378724] bus_for_each_dev+0x67/0xc0
> [ 1.378727] ? klist_add_tail+0x57/0x70

I am not able to reproduce above call stack when virtio-blk is assigned 4 queues
while my qemu cmdline is "-smp 16,sockets=1,cores=8,threads=2".

# cat /sys/block/vda/mq/0/cpu_list
0, 1, 2, 3
# cat /sys/block/vda/mq/1/cpu_list
4, 5, 6, 7
# cat /sys/block/vda/mq/2/cpu_list
8, 9, 10, 11
# cat /sys/block/vda/mq/3/cpu_list
12, 13, 14, 15


I do agree in above case we would have issue if the mapping is established by
blk_mq_map_queues().


However, I am just curious how we finally reach at blk_mq_map_queues() from
blk_mq_alloc_tag_set()?

It should be something like:

blk_mq_alloc_tag_set()
-> blk_mq_update_queue_map()
-> if (set->ops->map_queues && !is_kdump_kernel())
return set->ops->map_queues(set);
-> else
return blk_mq_map_queues(&set->map[HCTX_TYPE_DEFAULT]);

Wouldn't we always have set->ops->map_queues = virtblk_map_queues()?

Or the execution reach at:

virtblk_map_queues()
-> blk_mq_virtio_map_queues()
-> if (!vdev->config->get_vq_affinity)
return blk_mq_map_queues(qmap);
-> else
establish the mapping via get_vq_affinity

but vdev->config->get_vq_affinity == NULL?

For virtio pci, get_vq_affinity is always set. Seems virtio mmio would not set
get_vq_affinity.


I used to play with firecracker (by amazon) and it is interesting firecracker
uses mmio to setup virtio-blk.


Sorry for disturbing the review of this patch. I just would like to clarify in
which scenario we would hit this issue, e.g., when virtio-blk is based on mmio?

Dongli Zhang

>
>
> At 2019-03-22 19:58:08, "Dongli Zhang" <dongli.zhang@oracle.com> wrote:
>>
>>
>> On 03/22/2019 06:09 PM, luferry wrote:
>>> under virtual machine environment, cpu topology may differ from normal
>>> physical server.
>>
>> Would mind share the name of virtual machine monitor, the command line if
>> available, and which device to reproduce.
>>
>> For instance, I am not able to reproduce with qemu nvme or virtio-blk as I
>> assume they use pci or virtio specific mapper to establish the mapping.
>>
>> E.g., with qemu and nvme: -smp 8,sockets=1,cores=4,threads=2
>>
>> Indeed I use three queues instead of twp as one is reserved for admin.
>>
>> # ls /sys/block/nvme0n1/mq/*
>> /sys/block/nvme0n1/mq/0:
>> cpu0 cpu1 cpu2 cpu3 cpu_list nr_reserved_tags nr_tags
>>
>> /sys/block/nvme0n1/mq/1:
>> cpu4 cpu5 cpu6 cpu7 cpu_list nr_reserved_tags nr_tags
>>
>>
>> Thank you very much!
>>
>> Dongli Zhang
>>
>>> for example (machine with 4 cores, 2 threads per core):
>>>
>>> normal physical server:
>>> core-id thread-0-id thread-1-id
>>> 0 0 4
>>> 1 1 5
>>> 2 2 6
>>> 3 3 7
>>>
>>> virtual machine:
>>> core-id thread-0-id thread-1-id
>>> 0 0 1
>>> 1 2 3
>>> 2 4 5
>>> 3 6 7
>>>
>>> When attach disk with two queues, all the even numbered cpus will be
>>> mapped to queue 0. Under virtual machine, all the cpus is followed by
>>> its sibling cpu.Before this patch, all the odd numbered cpus will also
>>> be mapped to queue 0, can cause serious imbalance.this will lead to
>>> performance impact on system IO
>>>
>>> So suggest to allocate cpu map by core id, this can be more currency
>>>
>>> Signed-off-by: luferry <luferry@163.com>
>>> ---
>>> block/blk-mq-cpumap.c | 9 +++++----
>>> 1 file changed, 5 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/block/blk-mq-cpumap.c b/block/blk-mq-cpumap.c
>>> index 03a534820271..4125e8e77679 100644
>>> --- a/block/blk-mq-cpumap.c
>>> +++ b/block/blk-mq-cpumap.c
>>> @@ -35,7 +35,7 @@ int blk_mq_map_queues(struct blk_mq_queue_map *qmap)
>>> {
>>> unsigned int *map = qmap->mq_map;
>>> unsigned int nr_queues = qmap->nr_queues;
>>> - unsigned int cpu, first_sibling;
>>> + unsigned int cpu, first_sibling, core = 0;
>>>
>>> for_each_possible_cpu(cpu) {
>>> /*
>>> @@ -48,9 +48,10 @@ int blk_mq_map_queues(struct blk_mq_queue_map *qmap)
>>> map[cpu] = cpu_to_queue_index(qmap, nr_queues, cpu);
>>> } else {
>>> first_sibling = get_first_sibling(cpu);
>>> - if (first_sibling == cpu)
>>> - map[cpu] = cpu_to_queue_index(qmap, nr_queues, cpu);
>>> - else
>>> + if (first_sibling == cpu) {
>>> + map[cpu] = cpu_to_queue_index(qmap, nr_queues, core);
>>> + core++;
>>> + } else
>>> map[cpu] = map[first_sibling];
>>> }
>>> }
>>>

\
 
 \ /
  Last update: 2019-03-23 12:15    [W:0.062 / U:0.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site