lkml.org 
[lkml]   [2019]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 5/7] Documentation: fb: sm712fb: add information mainly about 2D.
Date
This commits add information about 32-bit color, 2D acceleration,
as well as adding additional, general information about the hardware
and many existing problems of the sm712fb driver.

Signed-off-by: Yifeng Li <tomli@tomli.me>
---
Documentation/fb/sm712fb.txt | 123 +++++++++++++++++++++++++++++++----
1 file changed, 110 insertions(+), 13 deletions(-)

diff --git a/Documentation/fb/sm712fb.txt b/Documentation/fb/sm712fb.txt
index c388442edf51..906b48aa40e4 100644
--- a/Documentation/fb/sm712fb.txt
+++ b/Documentation/fb/sm712fb.txt
@@ -1,31 +1,128 @@
What is sm712fb?
=================

-This is a graphics framebuffer driver for Silicon Motion SM712 based processors.
+"sm712fb" is a graphics framebuffer driver for Silicon Motion SM710 (LynxEM),
+SM712 (LynxEM+), and SM720 (Lynx3DM, Lynx3DM+, aka. LynxEM4+) series of
+video controllers. This series of video controller is a legacy from ~1998,
+and was used on many classic, "prehistoric" laptops from 1998-2004, such as
+IBM Thinkpad S30 and 240X. It was also used on some servers, industrial
+computers, x86 and non-x86 embedded devices where only basic graphics was
+needed.
+
+Notably, Lemote YeeLoong 8089, a MIPS laptop based on the Chinese Loongson
+2F MIPS processor, is also using this chip because of hardware constraints,
+and at a time, somewhat popular in the free software community due the
+fact that it was the first laptop powered exclusively by free software,
+and it was also an inexpensive platform for non-x86 hobbyists to explore.

How to use it?
==============

-Switching modes is done using the video=sm712fb:... boot parameter.
-
-If you want, for example, enable a resolution of 1280x1024x24bpp you should
-pass to the kernel this command line: "video=sm712fb:0x31B".
+You should not compile-in vesafb, since SM7xx can be used in a VGA
+compatible mode, resulting conflicts with this driver. In addition,
+the VGA compatible mode was never tested by the maintainers.

-You should not compile-in vesafb.
+Currently, the driver supports 3 modes: 640x480, 800x600, 1024x768,
+at 16, 24 or 32-bit depth. Switching modes is done using the
+`video=sm712fb:0x___` boot parameter. If you want, for example,
+enable a resolution of 1280x1024x24bpp, you should pass to the kernel
+this command line: "video=sm712fb:0x31B".

-Currently supported video modes are:
+Please consult the following table for the hexadecimal codes of
+different modes.

[Graphic modes]

-bpp | 640x480 800x600 1024x768 1280x1024
-----+--------------------------------------------
- 8 | 0x301 0x303 0x305 0x307
- 16 | 0x311 0x314 0x317 0x31A
- 24 | 0x312 0x315 0x318 0x31B
+bpp | 640x480 800x600 1024x768
+----+---------------------------
+ 16 | 0x311 0x314 0x317
+ 24 | 0x312 0x315 0x318
+ 32 | 0x329 0x32E 0x338
+
+32-bit is really 8:8:8:8, but the final 8-bit number is an "empty"
+alpha channel, it's otherwise equal to 24-bit color. However, they
+could still be useful. For example, "fbterm" supports 32-bit mode
+but not 24-bit mode.
+
+Notes about Modesetting
+========================
+
+The modesetting code in sm712fb has major problems.
+
+* Switching to 8-bit color mode will result in a black screen, so
+they are removed from the list of supported graphic modes. But they
+can still be switched to on-the-fly, don't do that then!
+
+* Only a refresh rate of 60 Hz is supported.
+
+* 1024x768 with 16-bit color is not really supported, because the
+registers have been hacked by the original developer to adapt
+the 1024x600 screen on Lemote YeeLoong 8089.
+
+* If you are using a Lemote YeeLoong 8089, please remember that only
+the 1024x768 modes are guaranteed to drive the LCD panel properly.
+Other modes are meant to drive a CRT, and may drive the LCD incorrectly
+and result in a white screen with random garbage. External VGA output is
+unaffected.
+
+Due to the way registers are hardcoded, it's impossible to fix them
+without a major code rewrite. If you've been hit by these problems badly
+and really need to get them fixed, please contact the driver maintainers.
+
+2D acceleration
+==============
+
+Without 2D acceleration, the framebuffer suffers from extremely low performance,
+even scrolling a single line of text on the console required an unaccelerated
+screen redraw. Thus, 2D acceleration is enable by default. However, currently
+it's only supported on SM710/712 with Little-Endian CPUs. Big-endian and
+SM720 devices are currently not supported.
+
+2D acceleration can be controlled using the `video=sm712fb:accel:1` parameter.
+The default option, "1" activate 2D acceleration. If you have problems, you can
+set "0" to disable it. Different options can be separated by a comma, for
+example, "video=sm712fb:0x31B,accel:0" set the resolution to 1280x1024x24bpp
+while disabling the 2D acceleration.
+
+Although it has been extensively tested by the maintainer, 2D acceleration
+in 24-bit color mode may still have minor issues. If you've encounter any
+screen glitches in 24-bit mode in Linux framebuffer the framebuffer, don't
+hurry disabling it, you should try switching to 32-bit mode first, normally
+it should fix the problem. If you can reliably reproduce the screen glitches,
+please report your method to the maintainers.

Missing Features
================
(alias TODO list)

- * 2D acceleratrion
+The following features are not implemented in this driver,
+
+ * 2D acceleration on SM720 and Big-Endian CPUs.
+ * More VGA modes.
* dual-head support
+ * hardware cursor support
+
+The first feature is planned to be implemented soon, but the maintainer
+does not receive any monetary or hardware support from any company or OEMs,
+and he has to purchase a test platform personally. The 1998's hardware
+still costs 200 USD+, so don't expected an ETA. If you have a Big-Endian
+platform and willing to help testing, please contact the maintainer, thanks!
+
+Other VGA modes, dual-head, or hardware cursor support should be possible to
+implement, but parts of the code must be rewritten, and there's little demand
+for them on this legacy (retro?) platform, so there's no plan to implement them.
+If you have a genuine need for them, please contact the maintainers.
+
+Maintainers
+================
+
+This driver is maintained by
+
+ * Tom Li <tomli@tomli.me>
+ * Sudip Mukherjee <sudipm.mukherjee@gmail.com>
+ * Teddy Wang <teddy.wang@siliconmotion.com>
+
+Tom Li was the last contributor of this driver who implemented 2D acceleration,
+and is the main author of this documentation, please send any bug reports or
+requests to Tom, but don't forget to CC other maintainers as well to make everyone
+be informed.
--
2.20.1
\
 
 \ /
  Last update: 2019-03-22 06:19    [W:0.409 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site