lkml.org 
[lkml]   [2019]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 0/3] Stingray USB PHY driver support
From
Date
On 3/19/19 11:38 AM, Scott Branden wrote:
> Thanks Srinath and Rob - patch series looks good now.
>
> patch series,
>
> Acked-by: Scott Branden <scott.branden@broadcom.com>
>

Kishon, can you let me know when you apply patches 1 and 2 so I can
queue up patch 3 for inclusion the 5.2 ARM SoC pull request? Thanks!

>
> On 2019-03-19 2:15 a.m., Srinath Mannam wrote:
>> These patches add Stingray USB PHY driver and its corresponding
>> DT nodes with documentation.
>>
>> This patch set is based on Linux-5.0-rc2.
>>
>> Changes from v5:
>>    - Removed redundant address and size cells in DT nodes.
>>
>> Changes from v4:
>>    - Addressed Rob Herring review comments
>>       - Removed child nodes and added #phy-cells 1
>>       - Added xlate function to get phy using phandle argument.
>>
>> Changes from v3:
>>    - Addressed Rob Herring review comments
>>       - Changed compatible strings.
>>       - updated driver based on new compatible strings.
>>
>> Changes from v2:
>>    - Addressed Kishon review comments
>>    - Updated patchset to Linux-5.0-rc2
>>
>> Changes from v1:
>>    - Addressed Kishon review comments
>>    - phy init call return value handle
>>    Srinath Mannam (3):
>>    dt-bindings: phy: Add Stingray USB PHY binding document
>>    phy: sr-usb: Add Stingray USB PHY driver
>>    arm64: dts: Add USB DT nodes for Stingray SoC
>>
>>   .../bindings/phy/brcm,stingray-usb-phy.txt         |  32 ++
>>   .../boot/dts/broadcom/stingray/stingray-usb.dtsi   |  72 ++++
>>   .../arm64/boot/dts/broadcom/stingray/stingray.dtsi |   1 +
>>   drivers/phy/broadcom/Kconfig                       |  11 +
>>   drivers/phy/broadcom/Makefile                      |   1 +
>>   drivers/phy/broadcom/phy-bcm-sr-usb.c              | 393
>> +++++++++++++++++++++
>>   6 files changed, 510 insertions(+)
>>   create mode 100644
>> Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt
>>   create mode 100644
>> arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
>>   create mode 100644 drivers/phy/broadcom/phy-bcm-sr-usb.c
>>


--
Florian

\
 
 \ /
  Last update: 2019-03-22 17:42    [W:0.663 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site