lkml.org 
[lkml]   [2019]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 7/8] emvtest: Add ability to run all tests
Date
From: David Jacobson <djacobs7@binghamton.edu>

evmtest tests functionality of different IMA-Appraisal policies.

To simplify testing, this patch defines an evmtest config file. This
allows for running all tests at once, rather than invoking each test
individually. Variables can be set once rather than specifying
parameters at runtime on the command line.

Signed-off-by: David Jacobson <djacobs7@binghamton.edu>

changelog:
* removed [OPTIONS] for runall
* added CONFIGURATION PATHNAME -> configuration file
* shellcheck compliant
---
evmtest/README | 31 +++++++++++++++++++++++++-
evmtest/evmtest | 52 ++++++++++++++++++++++++++++++++++++++++++++
evmtest/example.conf | 14 ++++++++++++
3 files changed, 96 insertions(+), 1 deletion(-)
create mode 100644 evmtest/example.conf

diff --git a/evmtest/README b/evmtest/README
index 4dddbc0..d202559 100644
--- a/evmtest/README
+++ b/evmtest/README
@@ -13,6 +13,7 @@ SYNOPSIS

evmtest runtest <test name> [OPTIONS]

+evmtest runall <configuration pathname>

DESCRIPTION
-----------
@@ -34,7 +35,7 @@ OPTIONS


TEST NAMES
-----------
+---------

boot_aggregate - verify the IMA boot-aggregate
env_validate - verify kernel build
@@ -45,6 +46,34 @@ TEST NAMES
xattr_preserve - test metadata preservation on file move


+
+CONFIGURATION PATHNAME
+----------------------
+
+The configuration pathname should point to the runall configuration file.
+
+
+=== Configuration File
+
+The evmtest configuration file allows all tests to be run by executing a single
+command. The configuration file contains all the options that needed for
+various tests and allows tests to be run non-interactively, so they can be
+integrated in a larger testing suite.
+
+The `example.conf` file provides a skeleton configuration file, where the only
+variable that *must* be defined is `IMA_KEY`. Defaults are described below.
+
+* `IMA_KEY` - The private key for the certificate on the IMA Trusted Keyring
+
+* `KBUILD_DIR` - Should point to a kernel build tree. If not provided, the test
+will use `/lib/modules/$(uname -r)/build`.
+
+* `KERN_IMAGE` - Should point towards an unsigned kernel image. If not provided,
+the test will attempt to use the running kernel.
+
+* `VERBOSE` - If set to 1, will add -v to all tests run
+
+
Introduction
------------

diff --git a/evmtest/evmtest b/evmtest/evmtest
index 18cb98d..d6f46f5 100755
--- a/evmtest/evmtest
+++ b/evmtest/evmtest
@@ -16,6 +16,7 @@ source "$EVMDIR"/files/common.sh
usage (){
echo "Usage:"
echo " evmtest runtest <test name> [OPTIONS]"
+ echo " evmtest runall <configuration file>"
echo ""
echo "Options:"
echo " -h Displays this help message"
@@ -67,6 +68,57 @@ elif [ "$1" == "runtest" ]; then
runtest "$@"
exit $?
fi
+elif [ "$1" == "runall" ]; then
+ if [ -z "$2" ] || [ ! -e "$2" ]; then
+ echo "evmtest runall <config file>"
+ echo "[!] Please provide a config file"
+ exit 1
+ fi
+ source "$2" # Load in config
+ if [ "$VERBOSE" -eq 1 ]; then
+ V="-v"
+ fi
+
+ # Key is not optional
+ if [ -z "$IMA_KEY" ]; then
+ echo "[*] Please correct your config file"
+ exit 1
+ fi
+
+ EVMTEST_require_root
+ FAIL=0
+ echo "[*] Running tests..."
+ # 1
+ "$EVMDIR"/tests/env_validate.sh -r "$V"
+ FAIL=$((FAIL+$?))
+ # 2
+ if [ -z "$KERN_IMAGE" ]; then
+ "$EVMDIR"/tests/kexec_sig.sh -k "$IMA_KEY" "$V"
+ else
+ "$EVMDIR"/tests/kexec_sig.sh -k "$IMA_KEY" -i \
+ "$KERN_IMAGE" "$V"
+ fi
+ FAIL=$((FAIL+$?))
+ # 3
+ if [ -z "$KBUILD_DIR" ]; then
+ "$EVMDIR"/tests/kmod_sig.sh -k "$IMA_KEY" "$V"
+ else
+ "$EVMDIR"/tests/kmod_sig.sh -b "$KBUILD_DIR" \
+ -k "$IMA_KEY" "$V"
+ fi
+ FAIL=$((FAIL+$?))
+ # 4
+ "$EVMDIR"/tests/policy_sig.sh -k "$IMA_KEY" "$V"
+ FAIL=$((FAIL+$?))
+ # 5
+ "$EVMDIR"/tests/boot_aggregate.sh "$V"
+ FAIL=$((FAIL+$?))
+ # 6
+ "$EVMDIR"/tests/xattr_preserve.sh "$V"
+ FAIL=$((FAIL+$?))
+ echo "..."
+ echo "[*] TESTS PASSED: $((6-FAIL))"
+ echo "[*] TESTS FAILED: $FAIL"
else
usage
fi
diff --git a/evmtest/example.conf b/evmtest/example.conf
new file mode 100644
index 0000000..fd1c8fe
--- /dev/null
+++ b/evmtest/example.conf
@@ -0,0 +1,14 @@
+# This is an example config file
+# There are three variables that can be set when using evmtest runall
+
+#Set this to 1 for verbose output
+VERBOSE=0
+# Path to the private key for the IMA Trusted Keyring
+# This is required
+IMA_KEY=/path/to/your/ima_key
+
+# If this is not provided, tests will run but attempt to copy the running kernel
+KERN_IMAGE=/path/to/unsigned/kernel_image
+
+# If this is not defined, tests will try to find build tree
+KBUILD_DIR=/path/to/kernel/build/tree
--
2.20.1
\
 
 \ /
  Last update: 2019-03-22 09:36    [W:0.663 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site