lkml.org 
[lkml]   [2019]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] EDAC, {skx|i10nm}_edac: Fix randconfig build error
Date
Configurations with CONFIG_EDAC_SKX and CONFIG_EDAC_I10NM
both enabled, but only one of them built-in and the other
being a loadable module fail to link because the common
file is built the wrong way:

skx_common.c:672: undefined reference to `__this_module'

This overrides the way the modules are built, building
both into the zImage file if that happens.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/edac/Kconfig | 9 +++++++++
drivers/edac/Makefile | 8 ++++++--
2 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 47eb4d13ed5f..70080926329f 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -235,6 +235,7 @@ config EDAC_SKX
depends on ACPI_NFIT || !ACPI_NFIT # if ACPI_NFIT=m, EDAC_SKX can't be y
select DMI
select ACPI_ADXL
+ select EDAC_SKX_COMMON
help
Support for error detection and correction the Intel
Skylake server Integrated Memory Controllers. If your
@@ -247,12 +248,20 @@ config EDAC_I10NM
depends on ACPI_NFIT || !ACPI_NFIT # if ACPI_NFIT=m, EDAC_I10NM can't be y
select DMI
select ACPI_ADXL
+ select EDAC_SKX_COMMON
help
Support for error detection and correction the Intel
10nm server Integrated Memory Controllers. If your
system has non-volatile DIMMs you should also manually
select CONFIG_ACPI_NFIT.

+config EDAC_SKX_COMMON
+ tristate
+ help
+ This is an internal helper symbol to ensure that all variants
+ of the EDAC_SKX driver are either built-in or modular, as mixing
+ the two causes link time problems.
+
config EDAC_PND2
tristate "Intel Pondicherry2"
depends on PCI && X86_64 && X86_MCE_INTEL
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 89ad4a84a0f6..0f363309f662 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -58,10 +58,14 @@ layerscape_edac_mod-y := fsl_ddr_edac.o layerscape_edac.o
obj-$(CONFIG_EDAC_LAYERSCAPE) += layerscape_edac_mod.o

skx_edac-y := skx_common.o skx_base.o
-obj-$(CONFIG_EDAC_SKX) += skx_edac.o
+ifdef CONFIG_EDAC_SKX
+obj-$(CONFIG_EDAC_SKX_COMMON) += skx_edac.o
+endif

i10nm_edac-y := skx_common.o i10nm_base.o
-obj-$(CONFIG_EDAC_I10NM) += i10nm_edac.o
+ifdef CONFIG_EDAC_I10NM
+obj-$(CONFIG_EDAC_SKX_COMMON)) += i10nm_edac.o
+endif

obj-$(CONFIG_EDAC_MV64X60) += mv64x60_edac.o
obj-$(CONFIG_EDAC_CELL) += cell_edac.o
--
2.20.0
\
 
 \ /
  Last update: 2019-03-22 15:06    [W:0.032 / U:0.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site