lkml.org 
[lkml]   [2019]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/2] usb: core: Try generic PHY_MODE_USB_HOST if usb_phy_roothub_set_mode fails
From
Date
On 22/03/2019 09:51, Chen-Yu Tsai wrote:
> From: Chen-Yu Tsai <wens@csie.org>
>
> Some PHYs do not support PHY_MODE_USB_HOST_SS, i.e. USB 3.0 or higher.
> Fall back and try the more generic PHY_MODE_USB_HOST if it fails.
>
> Fixes: b97a31348379 ("usb: core: comply to PHY framework")
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
> drivers/usb/core/hcd.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
> index 3189181bb628..975d7c1288e3 100644
> --- a/drivers/usb/core/hcd.c
> +++ b/drivers/usb/core/hcd.c
> @@ -2741,6 +2741,9 @@ int usb_add_hcd(struct usb_hcd *hcd,
>
> retval = usb_phy_roothub_set_mode(hcd->phy_roothub,
> PHY_MODE_USB_HOST_SS);
> + if (retval)
> + retval = usb_phy_roothub_set_mode(hcd->phy_roothub,
> + PHY_MODE_USB_HOST);
> if (retval)
> goto err_usb_phy_roothub_power_on;
>
>

Tested-by: Neil Armstrong <narmstrong@baylibre.com>

This fixes USB on Amlogic GXL/GXL, tested on a Nexbox A1 with a S912 SoC running v5.1-rc1

Error was :
[ 4.851477] phy phy-d0078080.phy.3: unsupported PHY mode 5
[ 4.856266] xhci-hcd: probe of xhci-hcd.0.auto failed with error -22

Neil

\
 
 \ /
  Last update: 2019-03-22 13:57    [W:0.038 / U:2.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site