lkml.org 
[lkml]   [2019]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/2] dt-bindings: i2c-stm32: update optional properties for stm32h7/stm32mp1
From
Date
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>

On 3/6/19 4:11 PM, Bich HEMON wrote:
> Add STM32H7 and STM32MP1 in the list of compatible socs for each
> optional property.
>
> Signed-off-by: Bich Hemon <bich.hemon@st.com>
> ---
> Documentation/devicetree/bindings/i2c/i2c-stm32.txt | 17 +++++++++--------
> 1 file changed, 9 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt
> index 7d054f1..f334738 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt
> +++ b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt
> @@ -19,18 +19,19 @@ Optional properties:
> the default 100 kHz frequency will be used.
> For STM32F4 SoC Standard-mode and Fast-mode are supported, possible values are
> 100000 and 400000.
> - For STM32F7 SoC, Standard-mode, Fast-mode and Fast-mode Plus are supported,
> - possible values are 100000, 400000 and 1000000.
> -- i2c-scl-rising-time-ns: Only for STM32F7, I2C SCL Rising time for the board
> - (default: 25)
> -- i2c-scl-falling-time-ns: Only for STM32F7, I2C SCL Falling time for the board
> - (default: 10)
> + For STM32F7, STM32H7 and STM32MP1 SoCs, Standard-mode, Fast-mode and Fast-mode
> + Plus are supported, possible values are 100000, 400000 and 1000000.
> +- i2c-scl-rising-time-ns: I2C SCL Rising time for the board (default: 25)
> + For STM32F7, STM32H7 and STM32MP1 only.
> +- i2c-scl-falling-time-ns: I2C SCL Falling time for the board (default: 10)
> + For STM32F7, STM32H7 and STM32MP1 only.
> I2C Timings are derived from these 2 values
> -- st,syscfg-fmp: Only for STM32F7, use to set Fast Mode Plus bit within SYSCFG
> - whether Fast Mode Plus speed is selected by slave.
> +- st,syscfg-fmp: Use to set Fast Mode Plus bit within SYSCFG when Fast Mode
> + Plus speed is selected by slave.
> 1st cell: phandle to syscfg
> 2nd cell: register offset within SYSCFG
> 3rd cell: register bitmask for FMP bit
> + For STM32F7, STM32H7 and STM32MP1 only.
>
> Example:
>
>

\
 
 \ /
  Last update: 2019-03-21 09:29    [W:0.070 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site