lkml.org 
[lkml]   [2019]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] drm/panel: otm8009a: set clock to 29.70 Mhz
Date
The panel does not support clock frequency over 30.74 Mhz.
The clock rate has been reduced to 29.70 Mhz & new timings have
been computed to get a framerate of 50fps.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
---
drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
index 87fa316..f715bbe 100644
--- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
+++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
@@ -67,15 +67,15 @@ struct otm8009a {
};

static const struct drm_display_mode default_mode = {
- .clock = 32729,
+ .clock = 29700,
.hdisplay = 480,
- .hsync_start = 480 + 120,
- .hsync_end = 480 + 120 + 63,
- .htotal = 480 + 120 + 63 + 120,
+ .hsync_start = 480 + 98,
+ .hsync_end = 480 + 98 + 32,
+ .htotal = 480 + 98 + 32 + 98,
.vdisplay = 800,
- .vsync_start = 800 + 12,
- .vsync_end = 800 + 12 + 12,
- .vtotal = 800 + 12 + 12 + 12,
+ .vsync_start = 800 + 15,
+ .vsync_end = 800 + 15 + 10,
+ .vtotal = 800 + 15 + 10 + 14,
.vrefresh = 50,
.flags = 0,
.width_mm = 52,
--
2.7.4
\
 
 \ /
  Last update: 2019-03-21 09:08    [W:0.053 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site