lkml.org 
[lkml]   [2019]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] scsi: smartpqi: Reporting unhandled SCSI errors
Date
When a HARDWARE_ERROR is triggered for asc=0x3e, the actual code is only considering the case where ascq=0x1.

Following the http://www.t10.org/lists/asc-num.htm#ASC_3E specification, other values may occur like a timeout (ascq=0x2).

This patch is about printing an error message when a non-handled message is received.
This could help diagnose a possible miss-behavior of the controller and/or a missing implementation in the Linux Kernel.

This patch keeps the exact same error handling but prints a message if an ascq != 1 income.

Signed-off-by: Erwan Velu <e.velu@criteo.com>
---
drivers/scsi/smartpqi/smartpqi_init.c | 23 ++++++++++++++++-------
1 file changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 75ec43aa8df3..baf16c138800 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -2762,16 +2762,25 @@ static void pqi_process_raid_io_error(struct pqi_io_request *io_request)
scsi_normalize_sense(error_info->data,
sense_data_length, &sshdr) &&
sshdr.sense_key == HARDWARE_ERROR &&
- sshdr.asc == 0x3e &&
- sshdr.ascq == 0x1) {
+ sshdr.asc == 0x3e) {
struct pqi_ctrl_info *ctrl_info = shost_to_hba(scmd->device->host);
struct pqi_scsi_dev *device = scmd->device->hostdata;

- if (printk_ratelimit())
- scmd_printk(KERN_ERR, scmd, "received 'logical unit failure' from controller for scsi %d:%d:%d:%d\n",
- ctrl_info->scsi_host->host_no, device->bus, device->target, device->lun);
- pqi_take_device_offline(scmd->device, "RAID");
- host_byte = DID_NO_CONNECT;
+ switch (sshdr.ascq) {
+ case 0x1: /*LOGICAL UNIT FAILURE */
+ if (printk_ratelimit())
+ scmd_printk(KERN_ERR, scmd, "received 'logical unit failure' from controller for scsi %d:%d:%d:%d\n",
+ ctrl_info->scsi_host->host_no, device->bus, device->target, device->lun);
+ pqi_take_device_offline(scmd->device, "RAID");
+ host_byte = DID_NO_CONNECT;
+ break;
+
+ default: /* See http://www.t10.org/lists/asc-num.htm#ASC_3E */
+ if (printk_ratelimit())
+ scmd_printk(KERN_ERR, scmd, "received unhandled error %d from controller for scsi %d:%d:%d:%d\n",
+ sshdr.ascq, ctrl_info->scsi_host->host_no, device->bus, device->target, device->lun);
+ break;
+ }
}

if (sense_data_length > SCSI_SENSE_BUFFERSIZE)
--
2.20.1
\
 
 \ /
  Last update: 2019-03-21 10:50    [W:0.055 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site