Messages in this thread | | | From | Richard Laing <> | Subject | [PATCH] Add I2C recovery handling for bcm-iproc based devices. | Date | Fri, 22 Mar 2019 12:35:27 +1300 |
| |
This patch adds I2C bus recovery support to the bcm-iproc I2C driver. use the existing generic recovery mechanism by providing the hooks needed to get and set the SCL and SDA lines.
The device must be placed in bit-bang mode before recovery starts and returned to normal operation when complete.
Richard Laing (1): Add i2c recovery handling for bcm-iproc based devices.
drivers/i2c/busses/i2c-bcm-iproc.c | 120 +++++++++++++++++++++++++++++++++++++ 1 file changed, 120 insertions(+)
-- 2.1.4
| |