lkml.org 
[lkml]   [2019]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] ARM: dts: imx6qdl-sabresd: change phy-mode to use rgmii-id
Hi Steve,

[Adding Andrew]

On Wed, Mar 20, 2019 at 1:03 PM Steve Twiss
<stwiss.opensource@diasemi.com> wrote:
>
> Hi Fabio,
>
> On 20 March 2019 12:17, Fabio Estevam wrote:
> > Subject: Re: [PATCH] ARM: dts: imx6qdl-sabresd: change phy-mode to use rgmii-id
> >
> > Hi Steve,
> >
> > On Wed, Mar 20, 2019 at 9:06 AM Steve Twiss
> > <stwiss.opensource@diasemi.com> wrote:
> > >
> > > The PHY used on the Freescale i.MX6Q/DL SABRE boards is qualified as
> > > 'rgmii' instead of 'rgmii-id'. Meaning the RX and TX delays that were
> >
> > This patch declares it as 'rgmii-id', which contradicts the commit log.
>
> The PHY used on the Freescale i.MX6Q/DL SABRE boards is qualified as
> 'rgmii' instead of 'rgmii-id'.
>
> Can that be read two ways?
> I meant the phy-mode is currently qualified as 'rgmii' instead of what it
> should be: 'rgmii-id'.

Thanks for the clarification.

>
> [...]
>
> > > This patch fixes the network problems seen on the Freescale i.MX6Q/DL
> >
> > Please provide a Fixes tag. It would be good to know if this fix needs
> > to be applied to older kernels.
>
> I didn't put a Fixes tag in because I find this patch fixes v5.1-rc1 (which I see as broken).
> But the patch is not needed in v5.0 because I see that as working.
> So didn't see the need for a Cc: stable.

It seems we have other boards that need to be fixed and we can not
have an old dtb with functional Ethernet with a new kernel.

Does anyone know if this issue is AR8031 specific?

Thanks

\
 
 \ /
  Last update: 2019-03-20 18:04    [W:0.128 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site