lkml.org 
[lkml]   [2019]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCHv1 2/2] arm64: dts: qcom: pms405: Rename adc outputs as per schematics
Date
The adc outputs shouldn't contain information about their configuration
e.g. 100K pull-up, but just reflect the name of the signal in the
schematics.

Making them labels also allows us to overwrite their configuration in
board-specific DTs.

Sort them by order as used in adc5_chans_rev2, while we're at it.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
arch/arm64/boot/dts/qcom/pms405.dtsi | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
index 8b6aa2334f56..37c8bea24796 100644
--- a/arch/arm64/boot/dts/qcom/pms405.dtsi
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -98,7 +98,7 @@
qcom,pre-scaling = <1 1>;
};

- vph_pwr {
+ pon_1: vph_pwr {
reg = <ADC5_VPH_PWR>;
qcom,pre-scaling = <1 3>;
};
@@ -108,22 +108,22 @@
qcom,pre-scaling = <1 1>;
};

- xo_therm_100k_pu {
- reg = <ADC5_XO_THERM_100K_PU>;
+ pa_therm1: thermistor1 {
+ reg = <ADC5_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};

- amux_thm1_100k_pu {
- reg = <ADC5_AMUX_THM1_100K_PU>;
+ pa_therm3: thermistor3 {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};

- amux_thm3_100k_pu {
- reg = <ADC5_AMUX_THM3_100K_PU>;
+ xo_therm: xo_temp {
+ reg = <ADC5_XO_THERM_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
--
2.17.1
\
 
 \ /
  Last update: 2019-03-20 14:40    [W:0.045 / U:1.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site