lkml.org 
[lkml]   [2019]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC v2 09/11] drm/msm/dpu: Use OPP API to set clk/perf state
Date
On some qualcomm platforms DPU needs to express a perforamnce state
requirement on a power domain depennding on the clock rates.
Use OPP table from DT to register with OPP framework and use
dev_pm_opp_set_rate() to set the clk/perf state.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 7 ++++++-
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 9 +++++++++
2 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
index 9f20f397f77d..db21a86b242b 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
@@ -15,6 +15,7 @@
#include <linux/debugfs.h>
#include <linux/errno.h>
#include <linux/mutex.h>
+#include <linux/pm_opp.h>
#include <linux/sort.h>
#include <linux/clk.h>
#include <linux/bitmap.h>
@@ -298,7 +299,11 @@ static int _dpu_core_perf_set_core_clk_rate(struct dpu_kms *kms, u64 rate)
rate = core_clk->max_rate;

core_clk->rate = rate;
- return msm_dss_clk_set_rate(core_clk, 1);
+
+ if (dev_pm_opp_get_opp_table(&kms->pdev->dev))
+ return dev_pm_opp_set_rate(&kms->pdev->dev, core_clk->rate);
+ else
+ return msm_dss_clk_set_rate(core_clk, 1);
}

static u64 _dpu_core_perf_get_core_clk_rate(struct dpu_kms *kms)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 885bf88afa3e..684bd6982aaf 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -22,6 +22,7 @@
#include <linux/debugfs.h>
#include <linux/of_irq.h>
#include <linux/dma-buf.h>
+#include <linux/pm_opp.h>

#include "msm_drv.h"
#include "msm_mmu.h"
@@ -1014,6 +1015,12 @@ static int dpu_bind(struct device *dev, struct device *master, void *data)
if (!dpu_kms)
return -ENOMEM;

+ dev_pm_opp_set_clkname(dev, "core");
+
+ ret = dev_pm_opp_of_add_table(dev);
+ if (ret)
+ dev_err(dev, "failed to init OPP table: %d\n", ret);
+
mp = &dpu_kms->mp;
ret = msm_dss_parse_clock(pdev, mp);
if (ret) {
@@ -1040,6 +1047,7 @@ static void dpu_unbind(struct device *dev, struct device *master, void *data)
struct dpu_kms *dpu_kms = platform_get_drvdata(pdev);
struct dss_module_power *mp = &dpu_kms->mp;

+ dev_pm_opp_of_remove_table(dev);
msm_dss_put_clk(mp->clk_config, mp->num_clk);
devm_kfree(&pdev->dev, mp->clk_config);
mp->num_clk = 0;
@@ -1078,6 +1086,7 @@ static int __maybe_unused dpu_runtime_suspend(struct device *dev)
return rc;
}

+ dev_pm_opp_set_rate(dev, 0);
rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, false);
if (rc)
DPU_ERROR("clock disable failed rc:%d\n", rc);
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
\
 
 \ /
  Last update: 2019-03-20 10:51    [W:0.223 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site