lkml.org 
[lkml]   [2019]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] [RFC] spi: pxa2xx: Do cs if restart the SSP during pxa2xx_spi_transfer_one()
From
Date
Hi Jin

On 3/8/19 9:28 AM, Xiao, Jin wrote:
>
> Yes, the spi core has de-asserted the CS before the
> pxa2xx_spi_unprepare_transfer(). The problem on my side is that the new
> transfer will restart the SSP in pxa2xx_spi_transfer_one(). The spi core
> has asserted the CS again before restart the SSP.  In my test the CS
> assert before the restart SSP can't ensure the spi transfer working
> correctly.
>
I wanted to ask have you found any other fix or reason than the patches
you have sent?

I've been trying to debug why the commit d5898e19c0d7 ("spi: pxa2xx: Use
core message processing loop") is causing the regression you are seeing.

I've been testing this by sending two or more messages each consisting
of two 4-byte transfers through the spidev. SPI mode 3 and clock is 1
MHz. I see only slight timing difference between a commit before and at
d5898e19c0d7 when the chip select is active.

8ae55af38817: CS act to CLK running ~40 us. CLK idle to CS deact ~26 us
d5898e19c0d7: CS act to CLK running ~34 us. CLK idle to CS deact ~18 us

There is more difference/variability during the times when the CS is not
active between messages. Which is understandable since there happens
message passing from userspace, queing, etc.

At 8ae55af38817 total time over 2 messages varies from ~600 us to 1200
~us and at d5898e19c0d7 from ~500 us to 1100 us. Then at v4.19 it goes a
bit slover and varies between ~700 to 1600 us. Most probably due some
other change than in SPI subsystem as there is not commit either in SPI
core or spi-pxa2xx explaining it. Or just some random config change in
my kernel configuration between 4.17 and 4.19.

What I don't understand why additional CS toggling makes it work for you
in case SSP was stopped in pxa2xx_spi_unprepare_transfer() and restarted
again in pxa2xx_spi_transfer_one(). This SSP stopping and restarting is
not visible in the SPI signals since clock is already stopped when FIFO
gets empty.

I guess the reason why you are seeing pxa2xx_spi_unprepare_transfer()
only called sometimes is that in those cases where it is not called a
new SPI message got queued while processing the current one and in other
cases queue became empty before new message was queued.

In both cases there shouldn't be difference in CS handling. Which makes
me scratching my head why additional CS toggling is fixing the issue in
case there is SSP restart. And which was due more time elapsed between
messages and queue went empty.

--
Jarkko

\
 
 \ /
  Last update: 2019-03-19 16:28    [W:0.041 / U:3.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site