lkml.org 
[lkml]   [2019]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 06/10] dt-bindings: sdm845-pinctrl: add wakeup interrupt parent for GPIO
Thanks for the review Rob.

On Fri, Mar 15 2019 at 17:37 -0600, Rob Herring wrote:
>On Wed, Mar 13, 2019 at 03:18:40PM -0600, Lina Iyer wrote:
>> SDM845 SoC has an always-on interrupt controller (PDC) with select GPIO
>> routed to the PDC as interrupts that can be used to wake the system up
>> from deep low power modes and suspend.
>>
>> Cc: devicetree@vger.kernel.org
>> Signed-off-by: Lina Iyer <ilina@codeaurora.org>
>> ---
>> .../devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt | 7 ++++++-
>> 1 file changed, 6 insertions(+), 1 deletion(-)
>
>I still don't love this being specific to wake-up, but don't have a
>better suggestion. One nit, otherwise:
>
I added this to interrupts.txt. I will remove this, if the documentation in
[PATCH v4 03/10] of/irq: document properties for wakeup interrupt parent
of this series works.

-- Lina

>Reviewed-by: Rob Herring <robh@kernel.org>
>
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt
>> index 665aadb5ea28..f0fedbc5d41a 100644
>> --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt
>> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt
>> @@ -29,6 +29,11 @@ SDM845 platform.
>> Definition: must be 2. Specifying the pin number and flags, as defined
>> in <dt-bindings/interrupt-controller/irq.h>
>>
>> +- wakeup-parent:
>> + Usage: optional
>> + Value type: <phandle>
>> + Definition: A phandle to the wakeup interrupt controller for the SoC.
>> +
>> - gpio-controller:
>> Usage: required
>> Value type: <none>
>> @@ -53,7 +58,6 @@ pin, a group, or a list of pins or groups. This configuration can include the
>> mux function to select on those pin(s)/group(s), and various pin configuration
>> parameters, such as pull-up, drive strength, etc.
>>
>> -
>> PIN CONFIGURATION NODES:
>>
>> The name of each subnode is not important; all subnodes should be enumerated
>> @@ -160,6 +164,7 @@ Example:
>> #gpio-cells = <2>;
>> interrupt-controller;
>> #interrupt-cells = <2>;
>> + wake-parent = <&pdc_intc>;
>
>wakeup-parent
>
>>
>> qup9_active: qup9-active {
>> mux {
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
>> a Linux Foundation Collaborative Project
>>

\
 
 \ /
  Last update: 2019-03-18 16:38    [W:0.130 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site