lkml.org 
[lkml]   [2019]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] dt-bindings: iio: add Bosch BMG160 gyroscope sensor
Date
Define bindings for "bosch,bmg160" and "bosch,bmi055_gyro".

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
.../bindings/iio/gyroscope/bmg160.txt | 20 +++++++++++++++++++
1 file changed, 20 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt

diff --git a/Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt b/Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt
new file mode 100644
index 000000000000..78e18a1e9c1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt
@@ -0,0 +1,20 @@
+* Bosch BMG160 triaxial rotation sensor (gyroscope)
+
+Required properties:
+
+ - compatible : should be "bosch,bmg160" or "bosch,bmi055_gyro"
+ - reg : the I2C address of the sensor (0x69)
+
+Optional properties:
+
+ - interrupts : interrupt mapping for GPIO IRQ, it should by configured with
+ flags IRQ_TYPE_EDGE_RISING
+
+Example:
+
+bmg160@69 {
+ compatible = "bosch,bmg160";
+ reg = <0x69>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <18 (IRQ_TYPE_EDGE_RISING)>;
+};
--
2.19.1
\
 
 \ /
  Last update: 2019-03-18 16:14    [W:0.081 / U:1.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site